|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | Trace bis-(3-sulfopropyl)-disulfide enhanced electrodeposited copper foils显示文摘Smooth and strong copper foils are highly required for the development of printed circuit boards and Li-ion batteries.Adding additives is an efficient and low-cost method to enhance electrodeposited copper foils.Here we chose Bis-(3-sulfopropyl)-disulfide(SPS)as the additive and investigated its concentration on the surface roughness and tensile strength of the electrodeposited copper foils.A copper foil with the smoothest surface(Rz=2.1μm)and the highest tensile strength(~338 MPa)was prepared with1.5 mg/L SPS.The contact angle on the copper foil decreased with the reduction of surface roughness.The enhancing mechanism of the SPS was investigated by scanning electron microscopy and X-ray diffraction.The refined grain and enhanced(220)texture were considered to be the radical reason for the smooth and strong copper foils.The electrochemical results prove the suppressing effect is related to the SPS adsorption. | Lingling Liu Yeqiang Bu Yue Sun Jianfeng Pan Jiabin Liu Jien Ma Lin Qiu Youtong Fang | 2021 | Journal of Materials Science & Technology2021，，15： | 6 |
| 2 | A review of nondestructive examination technology for polyethylene pipe in nuclear power plant显示文摘 | Jinyang ZHENG Yue ZHANG Dongsheng HOU Yinkang QIN Weican GUO Chuck ZHANG Jianfeng SHI | 2018 | Frontiers of Mechanical Engineering2018，13，4： | 6 |
| 3 | Dark matter direct search sensitivity of the PandaX-4T experiment显示文摘The Panda X-4T experiment, a 4-ton scale dark matter direct detection experiment, is being planned at the China Jinping Underground Laboratory. In this paper we present a simulation study of the expected background in this experiment. In a 2.8-ton fiducial mass and the signal region between 1-10 keV electron equivalent energy, the total electron recoil background is found to be 4.9 × 10^(-5) kg^(-1) d^(-1) keV^(-1). The nuclear recoil background in the same region is 2.8 × 10^(-7) kg^(-1) d^(-1) keV^(-1). With an exposure of 5.6 ton-years, the sensitivity of Panda X-4 T could reach a minimum spin-independent dark matter-nucleon cross section of 6 × 10^(-48) cm^2 at a dark matter mass of 40 Ge V/c^2. | HongGuang Zhang Abdusalam Abdukerim Wei Chen Xun Chen YunHua Chen XiangYi Cui BinBin Dong DeQing Fang ChangBo Fu Karl Giboni Franco Giuliani LinHui Gu XuYuan Guo ZhiFan Guo Ke Han ChangDa He ShengMing He Di Huang XingTao Huang Zhou Huang Peng Ji XiangDong Ji YongLin Ju ShaoLi Li Yao Li Heng Lin HuaXuan Liu JiangLai Liu YuGang Ma YaJun Mao KaiXiang Ni JinHua Ning XiangXiang Ren Fang Shi AnDi Tan AnQing Wang Cheng Wang HongWei Wang Meng Wang QiuHong Wang SiGuang Wang XiuLi Wang XuMing Wang Zhou Wang MengMeng Wu ShiYong Wu JingKai Xia MengJiao Xiao PengWei Xie BinBin Yan JiJun Yang Yong Yang ChunXu Yu JuMin Yuan JianFeng Yue Dan Zhang Tao Zhang Li Zhao QiBin Zheng JiFang Zhou Ning Zhou XiaoPeng Zhou | 2019 | Science China(Physics,Mechanics & Astronomy)2019，62，3： | 6 |
| 4 | Germination and early seedling growth of Pinus densata Mast.provenances显示文摘We studied seed germination and early seedling growth of Pinus densata to explore the range of variability within the species and to inform afforestation practices.Phenotypes were evaluated at a forest tree nursery under conditions that support Pinus yunnanensis, one of the presumed parental species of P. densata. Seeds were collected from 20 open-pollinated trees within each of eight autochthonous populations representing the natural distribution of P. densata in China to assess variation in germination traits and early seedling growth, and to examine the relationships among these traits. Results showed that seeds from all populations germinated and seedlings established successfully. There were significant differences among populations in 13 of 14 traits evaluated. Seed germination and early seedling growth were strongly related to seed size and seed weight. Bigger seeds germinated earlier and faster than small seeds, and seedling size was positively correlated with seed size. Some germination traits were strongly and significantly correlated with climatic variables associated with the provenance of the studied populations. Based on these observations, we conclude there were large, significant, and biologically important differences among P. densata populations in seed germination and seedling growth traits. The observed variability probably reflects a high degree of adaptive differentiation among populations that is likely to be relevant for future afforestation. | Yulan Xu Nianhui Cai Bin He Ruili Zhang Wei Zhao Jianfeng Mao Anan Duan Yue Li Keith Woeste | 2016 | Journal of Forestry Research2016，27，2： | 5 |
| 5 | Acyclic edge coloring of graphs with large girths显示文摘A proper edge coloring of a graph G is called acyclic if there is no 2-colored cycle in G. The acyclic chromatic index of G, denoted by χ'a(G), is the least number of colors such that G has an acyclic edge k-coloring. Let G be a graph with maximum degree Δ and girth g(G), and let 1≤r≤2Δ be an integer. In this paper, it is shown that there exists a constant c > 0 such that if g(G)≥cΔ r log(Δ2/r) then χa(G)≤Δ + r + 1, which generalizes the result of Alon et al. in 2001. When G is restricted to series-parallel graphs, it is proved that χ'a(G) = Δ if Δ≥4 and g(G)≥4; or Δ≥3 and g(G)≥5. | LIN QiZhong HOU JianFeng LIU Yue | 2012 | Science China Mathematics2012，55，12： | 4 |
| 6 | First experimental constraints on WIMP couplings in the effective field theory framework from CDEX显示文摘We present weakly interacting massive particles(WIMPs) search results performed using two approaches of effective field theory from the China Dark Matter Experiment(CDEX), based on the data from both CDEX-1B and CDEX-10 stages. In the nonrelativistic effective field theory approach, both time-integrated and annual modulation analyses were used to set new limits for the coupling of WIMP-nucleon effective operators at 90% confidence level(C.L.) and improve over the current bounds in the low mχregion. In the chiral effective field theory approach, data from CDEX-10 were used to set an upper limit on WIMP-pion coupling at 90% C.L. We for the first time extended the limit to the m_(χ)<6 GeV/c^(2) region. | Yi Wang Zhi Zeng Qian Yue LiTao Yang KeJun Kang YuanJing Li Mehment Agartioglu HaiPeng An JianPing Chang JingHan Chen YunHua Chen JianPing Cheng Cheng Yi Chiang WenHan Dai Zhi Deng ChangHao Fang XinPing Geng Hui Gong QiuJu Guo XuYuan Guo HongJian He Li He ShengMing He JinWei Hu TuChen Huang HanXiong Huang HaiTao Jia LiPing Jia Xi Jiang HauBin Li JianMin Li Jin Li MingXuan Li RenMingJie Li Xia Li YuLan Li Bin Liao FongKay Lin ShinTed Lin ShuKui Liu YanDong Liu Yu Liu YuanYuan Liu ZhongZhi Liu Hao Ma YuCai Mao QiYuan Nie JinHua Ning Hui Pan NingChun Qi Jie Ren XiChao Ruan ChangSong Shang Vivek Sharma Ze She Lakhwinder Singh Monoj Kumar Singh TianXi Sun ChangJian Tang WeiYou Tang Yang Tian GuangFu Wang Li Wang Qing Wang Yu Chen Wang YunXiang Wang Zhen Wang Henry Tsz-King Wong ShiYong Wu YuCheng Wu HaoYang Xing Yin Xu Tao Xue YuLu Yan Nan Yi ChunXu Yu HaiJun Yu JianFeng Yue Ming Zeng BingTao Zhang Lei Zhang FengShou Zhang ZhenYu Zhang KangKang Zhao MingGang Zhao JiFang Zhou ZuYing Zhou JingJun Zhu | 2021 | Science China(Physics,Mechanics & Astronomy)2021，64，8： | 3 |
| 7 | Genetic structure of needle morphological and anatomical traits of Pinus yunnanensis显示文摘Pinus yunnanensis Franch. is an particular conifer tree species in Yunnan–Guizhou plateau in southwest China. The morphological and anatomical traits of needles are important to evaluate geographic variation and population dynamics of conifer species. Seedlings from seven populations of P. yunnanensis were analyzed, looking at 22 morphological and anatomical needle traits. The results showed that variations among and within populations were significantly different for all traits and the variance components within populations were generally higher than that among populations in the most tested needle traits. The proportions of three-needle fascicle were significantly different among populations. The traits related to needle size in both morphology and anatomy were positive with latitude and negative with annual temperature and precipitation. Ratio indices, including mesophyllarea/vascular bundle area, mesophyll area/resin canals area, vascular bundle area/resin canals area and mesophyll area/(resin canals area and vascular bundle area), were negatively correlated with elevation and positively correlated with the annual mean temperature, showing some fitness feature for the populations. Needle traits were more significantly correlated with longitude than with other four environmental factors. Needle length was significantly correlated with almost all environmental factors. First four principal components accounted for 81.596 % of the variation with eigenvalues [1; the differences among populations were mainly dependent on needle width,stomatal density, section areas of vascular bundle, total resin canals, and mesophyll, as well as area ratio traits.Seven populations were divided into three categories by Euclidean distance. Variations in needle traits among the populations have shown systematic microevolution in terms of geographic impact on P. yunnanensis. This study would provide empirical data to characterize adaptation and genetic variation of P. yunnanensis, which would be helpful for management of genetic resources and reasonable utilization of them in future. | Yujie Huang Jianfeng Mao Zhiqiang Chen Jingxiang Meng Yulan Xu Anan Duan Yue Li | 2016 | Journal of Forestry Research2016，27，1： | 3 |
| 8 | Landing site topographic mapping and rover localization for Chang’e-4 mission显示文摘This paper presents the techniques and results of landing-site topographic mapping and rover localization using orbital,descent and rover images in the Chang’e-4 mission.High-resolution maps of the landing site are generated from orbital and descent images.Local digital elevation models and digital orthophoto maps with 0.02 m resolution are generated at each waypoint.The location of the lander is determined as(177.588?E,45.457?S)using festure-matching techniques.The cross-site visual localization method is routinely used to localize the rover at each waypoint to reduce error accumulation from wheel slippage and IMU drift in dead reckoning.After the first five lunar days,the rover travels 186.66 m from the lander,according to the cross-site visual localization.The developed methods and results have been directly utilized to support the mission’s operations.The maps and localization information are also valuable for supporting multiple scientific explorations of the landing site. | Zhaoqin LIU Kaichang DI Jian LI Jianfeng XIE Xiaofeng CUI Luhua XI Wenhui WAN Man PENG Bin LIU Yexin WANG Sheng GOU Zongyu YUE Tianyi YU Lichun LI Jia WANG Chuankai LIU Xin XIN Mengna JIA Zheng BO Jia LIU Runzhi WANG Shengli NIU Kuan ZHANG Yi YOU Bing LIU Jiangang LIU | 2020 | Science China(Information Sciences)2020，63，4： | 3 |
| 9 | Overview to the Hard X-ray Modulation Telescope (Insight-HXMT) Satellite显示文摘As China’s first X-ray astronomical satellite, the Hard X-ray Modulation Telescope (HXMT), which was dubbed as Insight-HXMT after the launch on June 15, 2017, is a wide-band(1-250 ke V) slat-collimator-based X-ray astronomy satellite with the capability of all-sky monitoring in 0.2-3 Me V. It was designed to perform pointing, scanning and gamma-ray burst(GRB)observations and, based on the Direct Demodulation Method (DDM), the image of the scanned sky region can be reconstructed.Here we give an overview of the mission and its progresses, including payload, core sciences, ground calibration/facility, ground segment, data archive, software, in-orbit performance, calibration, background model, observations and some preliminary results. | Shuang-Nan Zhang TiPei Li FangJun Lu LiMing Song YuPeng X u CongZhan Liu Yong Chen XueLei Cao QingCui Bu Zhi Chang Gang Chen Li Chen TianXiang Chen YiBao Chen YuPeng Chen Wei Cui WeiWei Cui JingKang Deng YongWei Dong Yuan Yuan Du MinXue Fu GuanHua Gao He Gao Min Gao MingYu Ge YuDong Gu Ju Guan Can Gungor ChengCheng Guo DaWei Han Wei Hu Yue Huang Jia Huo ShuMei Jia LuHua Jiang WeiChun Jiang Jing Jin YongJie Jin Bing Li ChengKui Li Gang Li MaoShun Li Wei Li Xian Li XiaoBo Li XuFang Li YanGuo Li ZiJian Li ZhengWei Li XiaoHua Liang JinYuan Liao GuoQing Liu HongWei Liu ShaoZhen Liu XiaoJing Liu Yuan Liu YiNong Liu Bo Lu XueFeng Lu Tao Luo Xiang Ma Bin Meng Yi Nang JianYin Nie Ge Ou JinLu Qu Na Sai RenCheng Shang GuoHong Shen Liang Sun Ying Tan Lian Tao YouLi Tuo Chen Wang ChunQin Wang GuoFeng Wang HuanYu Wang Juan Wang WenShuai Wang YuSa Wang XiangYang Wen BaiYang Wu BoBing Wu Mei Wu GuangCheng Xiao ShaoLin Xiong LinLi Yan JiaWei Yang Sheng Yang YanJi Yang QiBin Yi Bin Yuan AiMei Zhang ChunLei Zhang ChengMo Zhang Fan Zhang HongMei Zhang Juan Zhang Qiang Zhang ShenYi Zhangs Shu Zhang Tong Zhang WanChang Zhang Wei Zhang WenZhao Zhang Yi Zhang YiFei Zhang YongJie Zhang Yue Zhang Zhao Zhang Zhi Zhang ZiLiang Zhang HaiSheng Zhao XiaoFan Zhao ShiJie Zheng JianFeng Zhou YuXuan Zhu Yue Zhu RenLin Zhuang | 2020 | Science China(Physics,Mechanics & Astronomy)2020，63，4： | 2 |
| 10 | Bcl-2 gene and its family genes Bax,Bcl-Xl as well as Fas/Apo-1 and their clinical significance in acute leukemia显示文摘Bcl2geneislocatedonhumanchromosome18q21andconsistsof270Kb.Itisanimportantgenewhichcansupprescelularapoptosis.ApartfromBcl2... | Chen Yan , Zhou Jianfeng , Yue Beibei , Xiang Zhifu , Song Xiaohua Li Chongyu and Wang Bianming | 1998 | Chinese Medical Journal1998，，8： | 2 |
| 11 | Ceftazidime is a potential drug to inhibit SARS-CoV-2 infection in vitro by blocking spike protein-ACE2 interaction显示文摘Dear Editor,Coronavirus disease 2019(COVID-19)has spread globally as a severe pandemic,which is caused by a novel coronavirus named Severe Acute Respiratory Syndrome coronavirus 2(SARS-CoV-2).1 COVID-19 is a serious threat to healthcare systems,economies,and is devastating to some populations,such as the elderly and those with comorbidities.It is likely to coexist with human beings for a long time.Unfortunately,there is still no effective cure for COVID-19,especially the critically ill patients. | ChangDong Lin Yue Li YueBin Zhang ZhaoYuan Liu Xia Mu Chenjian Gu Jing Liu Yutang Lr GuoHui Li JianFeng Chen | 2021 | Signal Transduction and Targeted Therapy2021，6，6： | 2 |
| 12 | High proportion strontium-doped micro-arc oxidation coatings enhance early osseointegration of titanium in osteoporosis by anti-oxidative stress pathway显示文摘The excessive accumulation of reactive oxygen species(ROS)under osteoporosis precipitates a microenvironment with high levels of oxidative stress(OS).This could significantly interfere with the bioactivity of conventional titanium implants,impeding their early osseointegration with bone.We have prepared a series of strontium(Sr)-doped titanium implants via micro-arc oxidation(MAO)to verify their efficacy and differences in osteoinduction capabilities under normal and osteoporotic(high OS levels)conditions.Apart from the chemical composition,all groups exhibited similar physicochemical properties(morphology,roughness,crystal structure,and wettability).Among the groups,the low Sr group(Sr25%)was more conducive to osteogenesis under normal conditions.In contrast,by increasing the catalase(CAT)/superoxide dismutase(SOD)activity and decreasing ROS levels,the high Sr-doped samples(Sr75% and Sr100%)were superior to Sr25% in inducing osteogenic differentiation of MC3T3-E1 cells and the M2 phenotype polarization of RAW264.7 cells,thus enhancing early osseointegration.Furthermore,the results of both in vitro cell co-culture and in vivo studies also showed that the high Sr-doped samples(especially Sr100%)had positive effects on osteoimmunomodulation under the OS microenvironment.Ultimately,the collated findings indicated that the high proportion Sr-doped MAO coatings were more favorable for osteoporosis patients in implant restorations. | Xinkun Shen Kai Fang Kendrick Hii Ru Yie Zixin Zhou Yiding Shen Shuyi Wu Yue Zhu Zhennan Deng Pingping Ma Jianfeng Ma Jinsong Liu | 2022 | Bioactive Materials2022，7，4： | 2 |
| 13 | Analysis of the wear characteristics of an EDM electrode made by selective laser sintering 显示文摘 | ZHAO JIANFENG LI YUE ZHANG JIANHUA | 2003 | Journal of Materials Processing Technology2003，138，： | 1 |
| 14 | The Solar Upper Transition Region Imager(SUTRI)Onboard the SATech-01 Satellite显示文摘The Solar Upper Transition Region Imager(SUTRI)onboard the Space Advanced Technology demonstration satellite(SATech-01),which was launched to a Sun-synchronous orbit at a height of~500 km in 2022 July,aims to test the on-orbit performance of our newly developed Sc/Si multi-layer reflecting mirror and the 2k×2k EUV CMOS imaging camera and to take full-disk solar images at the Ne VII 46.5 nm spectral line with a filter width of~3 nm.SUTRI employs a Ritchey-Chrétien optical system with an aperture of 18 cm.The on-orbit observations show that SUTRI images have a field of view of~416×416 and a moderate spatial resolution of~8″without an image stabilization system.The normal cadence of SUTRI images is 30 s and the solar observation time is about16 hr each day because the earth eclipse time accounts for about 1/3 of SATech-01's orbit period.Approximately15 GB data is acquired each day and made available online after processing.SUTRI images are valuable as the Ne VII 46.5 nm line is formed at a temperature regime of~0.5 MK in the solar atmosphere,which has rarely been sampled by existing solar imagers.SUTRI observations will establish connections between structures in the lower solar atmosphere and corona,and advance our understanding of various types of solar activity such as flares,filament eruptions,coronal jets and coronal mass ejections. | Xianyong Bai Hui Tian Yuanyong Deng Zhanshan Wang Jianfeng Yang Xiaofeng Zhang Yonghe Zhang Runze Qi Nange Wang Yang Gao Jun Yu Chunling He Zhengxiang Shen Lun Shen Song Guo Zhenyong Hou Kaifan Ji Xingzi Bi Wei Duan Xiao Yang Jiaben Lin Ziyao Hu Qian Song Zihao Yang Yajie Chen Weidong Qiao Wei Ge Fu Li Lei Jin Jiawei He Xiaobo Chen Xiaocheng Zhu Junwang He Qi Shi Liu Liu Jinsong Li Dongxiao Xu Rui Liu Taijie Li Zhenggong Feng Yamin Wang Chengcheng Fan Shuo Liu Sifan Guo Zheng Sun Yuchuan Wu Haiyu Li Qi Yang Yuyang Ye Weichen Gu Jiali Wu Zhe Zhang Yue Yu Zeyi Ye Pengfeng Sheng Yifan Wang Wenbin Li Qiushi Huang Zhong Zhang | 2023 | Research in Astronomy and Astrophysics2023，23，6： | 1 |
| 15 | Analysis of the Wear Characteristics of an EDM Electrode Made by Selective Laser Sintering显示文摘 | Zhao Jianfeng Li Yue Zhang Jianhua | 2003 | Journal of Materials Processing Technology2003，138，13： | 1 |
| 16 | Synthesis and Properties of Novel Epoxidized Soybean Oil-modified Phenolic Resin /Montmorillonite Nanocomposites显示文摘The novel epoxidized soybean oil-modified-phenolic resin/clay nanocomposites(ESO-M-PR/CN) was prepared. The coupling agent-benzyldimethylphenylammonium chloride [C6H5CH2N+(CH3)2C6H5Cl-,B2MP] was adopted to modify the interface between the organic and inorganic phases. The effect of the nanocomposite structure on its physical and chemical properties was discussed. During the synthesizing process of ESO-M-PR/CN, the phenol hydroxyl was etherified by ESO or ESO epoxy resin prepolymer to provide long ESO epoxy segments. Long ESO epoxy resin chain segments enhanced the crosslink density of ESO-M-PR/CN. The thermal and mechanical properties exhibit a significant improvement. The temperature at which a weight loss of 5% occurs increases from 287.1 ℃ to 402.3 ℃. The flexural strength increases by 25%, while the flexural modulus increases by 39%. Moreover, the properties of resin were enhanced by the effect of the inorganic nanoparticles, while the size of the nanomontmorillonites in the phenolic resin was characterized with a scanning electron microscope. The particle size of inorganic montmorillonites in the modifi ed system is less than 100 nm. | HU Jianfeng SITU Yue XU Li HUANG Hong FU Heqing ZENG Hanwei CHEN Huanqin | 2008 | Journal of Wuhan University of Technology(Materials Science)2008，23，4： | 1 |
| 17 | Analysis of the wear characteristics of an EDM electrode made by selective laser sintering显示文摘 | Zhao Jianfeng Li Yue Zhang Jianhua | 2003 | Journal of Materials Processing Technology2003，138，123： | 1 |
| 18 | Analysis of the wear characteristics of an EDM electrode made by selective laser sintering 显示文摘 | ZHAO Jianfeng LI Yue ZHANG Jianhua | 2003 | Journal of Materials Processing Technology2003，138，： | 1 |
| 19 | A hybrid physics-data-driven surface roughness prediction model for ultra-precision machining显示文摘The surface finish quality is critical to the service performance of a machined part,and single-point diamond ultra-precision machining can achieve excellent surface quality for many engineering materials.This study studied the problem of predicting the surface roughness for titanium alloy workpieces in ultra-precision machining.Process data and surface roughness measurement results were obtained during end-face machining experiments.A deep learning neural network model was built based on the ResNet-50 architecture to predict surface roughness.We propose increasing prediction accuracy by using the energy ratio difference(ERD)as a stability feature that can be extracted using fast iterative variational mode decomposition(FI-VMD).The roughness value obtained with an analytic model was also used as an input feature of the prediction model.The prediction accuracy of the proposed approach was depicted to be improved by 8.7%with the two newly introduced roughness predictors.The influence of the tool parameters on the prediction accuracy was investigated,and the proposed hybrid-driven model exhibited higher robustness to errors of the tool parameters than the analytic roughness model. | BAI Long YANG QiZhong CHENG Xin DING Yue XU JianFeng | 2023 | Science China(Technological Sciences)2023，66，5： | 1 |
| 20 | Analysis of the wear characteristics of an EDM electrode made by selective laser sintering显示文摘 | ZHAO Jianfeng LI Yue ZHANG Jianhua | 2003 | Journal of Materials Processing Technology2003，138，13： | 1 |
您所在的机构暂未开通此部分的功能，请联系管理员