|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | 基于中子成像的水泥基材料毛细吸水动力学研究显示文摘总结了国内外有关水泥基材料毛细吸水的动力学机理及其现有模型,应用中子成像技术对其毛细吸水过程进行了可视化再现,对水分侵入的空间分布规律进行了定量分析。结果表明,在毛细孔吸附力作用下,水分前锋不断向水泥基材料内部推进,在吸水初期速度较快,后趋于平缓直至稳定;水分侵入曲线在深度和含量上同时增长,可以由线性+反S形模型来描述其空间分布特点,并与实测结果吻合良好;现有的'时间开方'及其修正模型对毛细吸水的后期预测不太合理,本文提出的渗透系数双曲线衰减模型更符合真实结果。 | 张鹏 赵铁军 Wittmann F.H. Lehmann E. | 2011 | 水利学报2011，42，1： | 17 |
| 2 | 罗马法对西方文明的贡献(上)显示文摘毫无疑问、罗马法是古罗马对西方文明做出的最伟大的贡献;不仅如此,罗马法还经常被人们称为现代社会的主要支柱之一。上述观点绝大部分已为并不了解其真正意义何在的人们所接受,这或许正是因为他们不了解罗马法的缘故。事实上,对于罗马法的历史意义加以界定是件困难的事情,更困难者在于发现其中独特的罗马因素,也在于对其意义以及罗马人民族特征的解释。 | F.H.劳森 黄炎 贺卫方 | 1988 | 比较法研究1988，2，1： | 14 |
| 3 | A Critical Role of AMT2;1 in Root-To-Shoot Translocation of Ammonium in Arabidopsis显示文摘在植物根的铵举起被 AMT/MEP/Rh-type 铵 transporters 调停。从在 Arabidopsis 根被表示的五 AMT,四 AMT1 类型 transporters 而没有生理的功能到目前为止被分到属于 MEP 亚科的唯一的相当或相同的事物,贡献铵举起, AMT2; 1。基于在铵供应下面,抄本 AMT2 铺平的观察; 1 增加了,它的倡导者活动优先地变了到 pericycle,我们估计了 AMT2 的贡献; 1 到木部装载。当暴露了到 15标记 N 的铵, amt2; 1 变异的线 translocated 更少 tracer 到射击和在木部树液的包含的更少铵。而且,在 amt1 ; 1 amt1 ; 2 amt1 ; 3 amt2 ; 1 四倍的异种( qko ), AMT2 的合作表示; 1 与任何一个 AMT1 ; 2 或 AMT1 ; 3 显著地提高的 15 N translocation 到射击,显示在 AMT2 之间的一个合作行动; 1 并且 AMT1 transporters 。在 N 缺乏下面, proAMT2; 1-GFP 线在外皮的根房间主要显示出提高的倡导者活动,它与一致,提高的铵流入由 AMT2 交谈了; 1 在 millimolar 底层集中。我们的结果除了在低亲密关系的范围中等作出贡献到根举起显示那, AMT2;主要在铵的 root-to-shoot translocation 的 1 个函数,响应 ?植物取决于它的 cell-type-specific 表达式营养的地位并且到本地铵坡度。 | Ricardo F.H. Giehl Alberto M. Laginha Fengying Duan Doris Rentsch Lixing Yuan Nicolaus von Wirén | 2017 | Molecular Plant2017，10，11： | 10 |
| 4 | 罗马法对西方文明的贡献(下)显示文摘公元6世纪,查士丁尼决定用立法方式对他希望保留下来的各种来源的全部生效法律加以颁布,或重新颁布。毫无疑问就是要对法律予以重新写定;所能做的全部工作便是对历代皇帝的决定和命令以及法学家们(他们最晚近的距那时也有二百多年了) | F.H.劳森 黄炎 贺卫方 | 1988 | 比较法研究1988，2，2： | 9 |
| 5 | ELECTROCHEMICAL NOISE ANALYSIS OF PURE ALUMINUM IN SODIUM CHLORIDE SOLUTION WITH WAVELET TRANSFORM TECHNIQUE显示文摘Wavelet transforms (WT) are proposed as an alternative tool to overcome the limitations of Fourier transforms (FFT) in the analysis of electrochemical noise (EN) data. The most relevant feature of this method of analysis is its capability of decomposing electrochemical noise records into different sets of wavelet coefficients, which contain information about the time scale characteristic of the associated corrosion event. In this context, the potential noise fluctuations during the free corrosion of pure aluminum in sodium chloride solution was recorded and analyzed with wavelet transform technique. The typical results showed that the EN signal is composed of distinct type of events, which can be classified according to their scales, i.e. their time constants. Meanwhile, the energy distribution plot (EDP) can be used as 'fingerprints' of EN signals and can be very useful for analyzing EN data in the future. | Z. Zhang, Q.D. Zhong, J.Q. Zhang, Y.L. Cheng, F.H. Cao, J.M. and C.N. CaoDepartment of Chemistry, Zhejiang University, Hangzhou 310027, ChinaElectrochemical Research Group, Shanghai University of Electric Power, Shanghai 200090, ChinaState Key Laboratory | 2002 | Acta Metallurgica Sinica(English Letters)2002，15，3： | 7 |
| 6 | 基于反向分析计算水泥基体的湿扩散系数显示文摘在总结国内外有关湿扩散非线性模型的基础上,提出了一种反向分析计算水泥基体湿扩散系数的方法,并采用进化算法对迭代计算过程进行了优化。将初始湿度为95%的3组同样试件分别置于76%、60%和47%的环境湿度下进行湿扩散试验,确定所需的材料参数以及初始和边界条件后,分别对3组试验数据进行独立计算,得到了基本相同的湿扩散系数,失水量的计算值与实测值也几乎吻合,表明该方法具有良好的可行性和满意度。 | 张鹏 赵铁军 Wittmann F.H. Slowik V. | 2010 | 水利学报2010，40，1： | 6 |
| 7 | A study of the corrosion of aluminum alloy 2024-T3 under thin electrolyte layers显示文摘 | Y.L. Cheng Z. Zhang F.H. Cao J.F. Li J.Q. Zhang J.M. Wang C.N. Cao | 2003 | Corrosion Science2003，，7： | 4 |
| 8 | 钛铝金属间化合物的生产、表征和商品化显示文摘本文介绍了钛铝金属间化合物单体及复合材料的生产、表征和商品化,强调了它们在航空航天工业中的需求和应用.它们优良的高温性能和低密度的结合是很有吸引力的,但在其获得广泛应用之前,必须克服其固有的低“宽容度”以及环境抗力问题。 | F.H.弗罗思 C.斯扬纳拉扬纳 D.爱里释 李成功 | 1991 | 材料工程1991，19，4： | 4 |
| 9 | EVOLUTION OF THE ELECTROCHEMICAL CHARACTERISTICS DURING PITTING CORROSION OF PURE ALUMINUM IN SODIUM CHLORIDE SOLUTION显示文摘The corrosion behavior of pure aluminum in neutral 3.0% (mass fraction) sodium chloride (NaCl) solution has been studied using electrochemical impedance spectroscopy (EIS) measurement in conjunction with the scanning electron microscopy (SEM) technique. EIS information on the evolution of pitting corrosion over a period of 15 days has been obtained and analyzed with equivalent circuit technique. The results shown that, during the ensemble constant immersion time, two time constants involved, the high frequency one originated from the protective layer on the corroding surface while the low frequency one from the diffusion process or the corrosion reaction and so on. And there existed a period for oxide film to growth and thickening prior to the commencement of the attacking of chloride ions to the substrate. Meanwhile, good relationship between EIS and the material corrosion type/ severity has been obtained, which has been interpreted according to the characteristics of corrosion process such as auto acceleration of pitting corrosion and the protection of local anodic reaction to the area around them. | Z. Zhang C. Cai F.H. Cao Z.N. Gao J.Q. Zhang C.N. Cao | 2005 | Acta Metallurgica Sinica(English Letters)2005，18，4： | 3 |
| 10 | Hot Cracking in AZ31 and AZ61 Magnesium Alloy显示文摘This paper examined the impact of the number of thermal cycles and augmented strain on hot cracking in AZ31 and AZ61 magnesium alloy. Statistical analyses were performed. Following observation using a scanning electron microscope (SEM), an energy dispersive spectrometer (EDS) was used for component analysis. Results showed that Al content in magnesium alloy has an effect on hot cracking susceptibility. In addition, the nonequilibrium solidification process produced segregation in Al content, causing higher liquid Mg-alloy rich Al content at grain boundaries, and resulting into liquefied grain boundaries of partially melted zone (PMZ). In summary, under multiple thermal cycles AZ61 produced serious liquation cracking. AZ61 has higher (6 wt%) Al content and produced much liquefied Mg17Al12 at grain boundaries under multiple thermal cycles. The liquefied Mg17Al12 were pulled apart and hot cracks formed at weld metal HAZ due to the augmented strain. Since AZ31 had half the Al content of AZ61, its hot-cracking susceptibility was lower than AZ61. In addition, AZ61 showed longer total crack length (TCL) in one thermal cycle compared to that in three thermal cycles. This phenomenon was possibly due to high-temperature gasification of Al during the welding process, which resulted in lower overall Al content. Consequently, shorter hot cracks exhibited in three thermal cycles. It was found the Al content of AZ31 and AZ61 can be used to assess the hot-cracking susceptibility. | C.J. Huang C.M. Cheng C.P. Chou F.H. Chen | 2011 | Journal of Materials Science & Technology2011，27，7： | 3 |
| 11 | The role of alloying additives and aging treatment on the impact behavior of 319 cast alloy显示文摘 | O. Elsebaie A.M.A. Mohamed A.M. Samuel F.H. Samuel A.M.A. Al-Ahmari | 2011 | Materials and Design2011，，6： | 2 |
| 12 | 中子照相技术及其在混凝土材料研究中的应用显示文摘介绍了中子照相技术的原理和基本装置,并将其应用于混凝土材料的检测和研究中。结果表明:中子照相能够直观地检测钢筋混凝土内部的裂缝发展情况,并能实现对混凝土中水分侵入过程的可视化研究。在成像数据的基础上,对传统的水分侵入模型进行了修正,认为在水分侵入的初始阶段,水渗透系数为常数;吸水超过4h后,渗透系数则按指数函数衰减。 | 张鹏 Wittmann F.H. 赵铁军 Lehmann E.H. 金祖权 | 2009 | 混凝土2009，，4： | 2 |
| 13 | 钛金属基复合材料的发展显示文摘本文综述了近20年来钛金属基复合材料的发展概况,着重讨论了增强纤维、基体金属、制造工艺、纤维及复合材料的力学性能和断口等。结论中在指出钛金属基复合材料现状的同时,还提出了充分发挥此类材料潜力所需进一步开展的冶金工作的建议。 | P.R.史密斯 F.H.弗罗思 李成功 | 1990 | 材料工程1990，18，3： | 2 |
| 14 | Effect of grain refining and Sr-modification interactions on the impact toughness of Al–Si–Mg cast alloys显示文摘 | A.M. Samuel H.W. Doty S. Valtierra F.H. Samuel | 2014 | Materials and Design2014，，： | 2 |
| 15 | ISRM Suggested Methods for rock stress estimation—Part 3: hydraulic fracturing (HF) and/or hydraulic testing of pre-existing fractures (HTPF)显示文摘 | B.C. Haimson F.H. Cornet | 2003 | International Journal of Rock Mechanics and Mining Sciences2003，，7： | 2 |
| 16 | A study of the corrosion of aluminum alloy 2024-T3 under thin electrolyte layers显示文摘 | Y.L. Cheng Z. Zhang F.H. Cao J.F. Li J.Q. Zhang J.M. Wang C.N. Cao | 2003 | Corrosion Science2003，，： | 2 |
| 17 | Fresnel absorption of 1μm- and 10μm-laser beams at the keyhole wall during laser beam welding: Comparison between smooth and wavy surfaces显示文摘 | Alexander F.H. Kaplan | 2011 | Applied Surface Science2011，，8： | 2 |
| 18 | Effects of phosphorus nutrition on tiller emergence in wheat显示文摘 | Daniel Rodríguez F.H. Andrade J. Goudriaan | 1999 | Plant and Soil1999，，2： | 1 |
| 19 | Water repellent surface impregnation for extension of service life of reinforced concrete structures in marine environments: The role of cracks显示文摘 | Jian-Guo Dai Y. Akira F.H. Wittmann H. Yokota Peng Zhang | 2009 | Cement and Concrete Composites2009，，2： | 1 |
| 20 | High-temperature sliding wear of metals显示文摘 | F.H. Stott | 2002 | Tribology International2002，，8： | 1 |
您所在的机构暂未开通此部分的功能，请联系管理员