|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | 模具行业“十一五”规划显示文摘根据我国模具行业的现状,'十五'期间取得的成绩和存在的主要差距,以及我国模具行业持续发展的态势,不断增加的市场需求和良好的宏观环境,确定了'十一五'模具行业规划的发展总量和争取进入世界模具生产制造强国的具体目标。特别对模具产品发展的重点和模具技术发展的重点提出了具体措施意见及政策建议。 | (China Die&Mould Industrial Association) | 2005 | 模具工业2005，，7： | 11 |
| 2 | HCWCI/Carbon Steel Bimetal Liner by Liquid-Liquid Compound Lost Foam Casting显示文摘Impact, friction and corrosion from the grinding balls and the grinding medium during the mineral processing result in liner breakage. Liner, made from Hadfield steel or alloyed steel, could not have served in wet grinding environment for more than ten months. Composite liner, made from HCWCI (high Cr white cast iron) and carbon steel, has been developed successfully with liquid-liquid composing process based on LFC (lost foam casting). The microstructure of composite was analyzed with optical microscope, SEM (scanning electron microscope)/EDX energy-dispersive X-ray and XRD (X-ray diffraction). According to micrograph, the combination region of two metals was staggered like dogtooth, no mixtures occurred between two liquid metals, and its interface presented excellent metallurgical bonding state. The results of mechanical property test show that, the hardness of HRC, the fracture toughness, and the bending strength are more than 61, 16.5 J/cm2 and 1 600 MPa, respectively. Comparison between liners made from bimetal composite and alloyed steel has also been investigated in industrial hematite ball mill. The results of eight months test in wet grinding environment prove that the service life of bimetal composite liner is three times as long as that of one made from alloyed steel. | XIAO Xiao-feng1,2, YE Sheng-ping2, YIN Wei-xin3, XUE Qiong4 (1. School of Mechanical Engineering and Automation, Wuhan Textile University, Wuhan 430073, Hubei, China 2. State Key Laboratory of Material Processing and Die and Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, Hubei, China 3. Wuhan Zhike Abrasive-Resistant Material Science and Technology Development Co Ltd, Wuhan 430073, Hubei, China 4. College of Science, Wuhan University of Technology, Wuhan 430079, Hubei, China) | 2012 | Journal of Iron and Steel Research(International)2012，19，10： | 11 |
| 3 | Microstructure and shear strength of the brazed joint of Ti(C,N)-based cermet to steel显示文摘Firm joins were obtained between Ti(C,N)-based cermet and steel with Ag-Cu-Zn-Ni filler metal by vacuum brazing. The effects of technological parameters such as brazing temperature, holding time, and filler thickness on the shear strength of the joints were investigated. The microstructure of welded area and the reaction products of the filler metal were examined by scanning electron microscopy (SEM), metallographic microscope (OM), energy-dispersive X-ray analysis (EDS), and X-ray diffraction (XRD). The brazing temperature of 870°C, holding time of 15 min, and filler thickness of 0.4 mm are a set of optimum technological parameters, under which the maximum shear strength of the joints, 176.5 MPa, is achieved. The results of microstructure show that the wettability of the filler metal on Ti(C,N)-based cermet and steel is well. A mutual solution layer and a diffusion layer exist between the welding base materials and the filler metal. | YE Dameng, XIONG Weihao, Zhang Xiuhai, QU Jun, and YAO Zhenghua State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, China | 2010 | Rare Metals2010，29，1： | 7 |
| 4 | 第十四届中国国际模具技术和设备展览会模具水平评述显示文摘对第十四届中国国际模具技术和设备展览会参展的各类模具、模具标准件及模具材料等进行了评述,介绍了我国模具、模具标准件、模具材料和模具CAD/CAE/CAM技术的发展现状和技术进步,分析了我国模具技术的发展趋势和存在的问题。 | Assess and Review Expert Team of the Technical Committee of China Die and Mould Association | 2012 | 模具工业2012，38，12： | 6 |
| 5 | 第十五届中国国际模具技术和设备展览会模具水平评述显示文摘对第十五届中国国际模具技术和设备展览会参展的各类模具、模具标准件及模具材料等进行了评述,介绍了我国模具、模具标准件、模具材料和模具CAD/CAE/CAM、智能化模具等技术的发展现状,分析了我国模具技术的发展趋势和存在的问题。 | Assess and Review Expert Team of 15th China International Exhibition on Die & Mould | 2014 | 模具工业2014，40，12： | 4 |
| 6 | Enhancement of second-order harmonic generation in polarized BaTiO_3 thin films embedded with Ag nanoparticles显示文摘RECENTLY, much attention has been paid to optical properties of ferroelectric thin films. Be- | ZHOU Ji, LI Longtu, GUI Zhilun, ZHANG Xiaowen, K. M. Moulding and D. J. Barber1 Department of Materials Science and Engineering, Tsinghua University, Beijing 100084, China 2 Department of Physics, The Hong Kong University of Science and Technology, Hong Kong, China | 1997 | Chinese Science Bulletin1997，42，15： | 2 |
| 7 | Numerical Filling Simulation of Injection Molding Using Three-Dimensional Model显示文摘Most injection molded parts are three-dimensional, with complex geometrical configurations and thick/thin wall sections. A 3D simulation model will predict more accurately the filling process than a 2.5D model. This paper gives a mathematical model and numeric method based on 3D model, in which an equal-order velocity-pressure interpolation method is employed successfully. The relation between velocity and pressure is obtained from the discretized momentum equations in order to derive the pressure equation. A 3D control volume scheme is employed to track the flow front. Th e validity of the model has been tested through the analysis of the flow in cavity. | Geng Tie Li Dequn Zhou Huamin State Key Lab.of Mould & Die Technology, HuaZhong University of Science and Technology, Wuhan 430074,China | 2003 | Computer Aided Drafting,Design and Manufacturing2003，13，1： | 2 |
| 8 | Vedolizumab for the treatment of active ulcerative colitis: A randomized controlled phase 2 dose‐ranging study显示文摘 | Asit Parikh Timothy Leach Tim Wyant Catherine Scholz Serap Sankoh Diane R. Mould Terry Ponich Irving Fox Brian G. Feagan | 2011 | Inflamm Bowel Dis2011，，8： | 2 |
| 9 | A semi-automated in vitro gas production technique for ruminant feedstuff evaluation显示文摘 | Rogerio M Mauricio Fergus L Mould Mewa S Dhanoa Emyr Owen Kulwant S Channa Michael K Theodorou | 1999 | Animal Feed Science and Technology1999，，4： | 2 |
| 10 | DELAUNAY-BASED SURFACE RECONSTRUCTION ALGORITHM IN REVERSE ENGINEERING显示文摘Triangulation of scattered points is the first important section during reverse engineering. New concepts of dynamic circle and closed point are put forward based on current basic method. These new concepts can narrow the extent which triangulation process should seek through and optimize the triangles during producing them. Updating the searching edges dynamically controls progress of triangulation. Intersection judgment between new triangle and produced triangles is changed into intersection judgment between new triangle and searching edges. Examples illustrate superiorities of this new algorithm. | Tian Xiaodong Zhou Xionghui Ruan XueyuNational Die & Mould CAD Engineering Research Center, Shanghai Jiaotong University,Shanghai 200030, China | 2002 | Chinese Journal of Mechanical Engineering2002，15，3： | 2 |
| 11 | Preparation of Oriented Barium Titanate Thin Films by Combination of Electrophoretic Deposition with Hydrothermal Treatment显示文摘Highly oriented barium titanate (BaTiO 3) thin films on Pt substrate were fabricated by combination of electrophoretic deposition with hydrothermal treatment.The structure and morphology of thin films were characterized by X-ray diffraction and field-emission scanning electron microscopy.It is found that the titania precursor film,Ba(OH)2 concentration and hydrothermal temperature play crucial roles in the film morphology and orientation.The BaTiO3 thin films with highly (110) preferred orientation can be formed on polycrystalline Pt substrate by appropriate adjustment of the reaction conditions.The orientation parameter f of highly oriented BaTiO3 films was up to 1.00.The films exhibited a smooth and crack-free surface and remained in the layered structure.In situ topotactic transformation and dissolution-crystallization mechanisms were proposed to explain the morphology and orientation of BaTiO3 films during hydrothermal treatment. | Lihong Xue and Youwei Yan State Key Laboratory of Materials Processing and Die and Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China | 2010 | Journal of Materials Science & Technology2010，26，11： | 2 |
| 12 | Influence of fibrolytic enzymes on the hydrolysis and fermentation of pure cellulose and xylan by mixed ruminal microorganisms in vitro显示文摘 | Colombatto D Mould F L Bhat M K | 2003 | Journal of Animal Science2003，81，： | 1 |
| 13 | Multivariate analysis of prognostic factors in CLL:clinical stage,IGVH gene mutational status,and loss or mutation of p53gene are independent prognostic factors显示文摘 | OSCIER D G GARDINER A C MOULD S J | 2002 | Blood2002，100，： | 1 |
| 14 | A semi-auto mated in vitro gas production technique :显示文摘 | Mauricio R M Mould F L Dhanoa M S | 1999 | Animal Feed Science and Technology1999，79，： | 1 |
| 15 | Relationship between interleukin-5 and eotaxin in regulating blood and tissue eosinophilia in mice显示文摘 | Mould AW Matthaei KI Young IG | 1997 | J Clin Invest1997，99，5： | 1 |
| 16 | 第十四届中国国际模具技术和设备展览会现代模具制造技术及设备评述显示文摘通过第十四届中国国际模具技术和设备展览会中模具加工技术及其关键设备、测量仪器、模具加工刀具技术等评述,介绍了现代模具制造技术的现状、特点和发展趋势。 | Assess and Review Expert Team of the Technical Committee of China Die and Mould Association | 2013 | 模具工业2013，39，1： | 1 |
| 17 | Evidence that monoclonal antibodies directed against the integrin β subunit plexin/ semaphorin/integrin domain stimulate function by inducing receptor extension显示文摘 | Mould A P Travis M A Barton S J | 2005 | J Biol Chem2005，280，6： | 1 |
| 18 | A semi-automated in vitro gas production technique for ruminant feedstuff evaluation 显示文摘 | Mauricio R M Mould M L Dhanoa M S | 1999 | Anirn Feed Sci Technol1999，79，： | 1 |
| 19 | Cognitive behaviors therapy of acute stress disorder: a four-year follow up 显示文摘 | Bryant RA Moulds ML Nix on RVD | 2003 | Behaviors Research and Therapy2003，41，4： | 1 |
| 20 | Minimally invasive surgery plus recombinant tissue-type plasminogen activator for intracerebral hemorrhage evacuation decreases pefihematomal edema显示文摘 | Mould WA Carhuapoma JR Muschelli J | 2013 | Stroke2013，44，3： | 1 |
您所在的机构暂未开通此部分的功能，请联系管理员