|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | A Review on Casting Magnesium Alloys: Modification of Commercial Alloys and Development of New Alloys显示文摘The research and development status of casting magnesium alloys including the commercial casting alloys and the new types casting alloys are reviewed,with more attention to microstructure and mechanical properties of modified-AZ91,AM60 and WE43 alloys with various additions,and new types of low cost casting alloys and high strength casting alloys.The modification and/or refinement of Mg2 Si phase in Mg–Al–Si based casting alloys by various additions are discussed and new purifying technologies for casting magnesium alloys are introduced to improve the performance.The modified AZ81 alloy with reduced impurities is found to have the tensile strength of 280 ± 6 MPa and elongation of 16% ± 0.7%.The fatigue strength of AZ91 D alloy could be obviously improved by addition of Ce and Nd.The Mg–16Gd–2Ag–0.3Zr alloy exhibits very high tensile and yield strengths(UTS:423 MPa and YS:328 MPa);however,its elongation still needs to be improved. | Fusheng Pan Mingbo Yang Xianhua Chen | 2016 | Journal of Materials Science & Technology2016，32，12： | 78 |
| 2 | Hierarchical graphene foam-based phase change materials with enhanced thermal conductivity and shape stability for efficient solar-to-thermal energy conversion and storage显示文摘最近, graphene 泡沫(GF ) 与一三维(3D ) 互连指导模板的化学蒸汽免职(CVD ) 生产的网络被用来与提高的热电导率准备合成阶段变化材料(脉冲编码调制) 。然而, GF 的毛孔尺寸象几百测微计一样大,导致为从在到 GF 神气墙的大毛孔内的 PCM 的热转移的一个显著热电阻。在这研究,新奇 3D 层次 GF (HGF ) 被用空 graphene 网络填满 GF 的毛孔获得。HGF 然后被用来准备基于的石蜡蜡(PW ) 合成脉冲编码调制。PW/HGF 合成脉冲编码调制的热传导性分别地比 PW/GF 合成脉冲编码调制和纯 PW 的高是 87% 和 744% 。PW/HGF 合成脉冲编码调制也与在 100 次骑车比 PW/GF 合成脉冲编码调制,在阶段变化温度的可以忽略的变化,是 95% 纯 PW 的高热的精力存储密度,好热可靠性,和化学稳定性展出更好的形状稳定性。更重要地, PW/HGF 合成脉冲编码调制与高 light-to-thermal 精力变换和存储效率允许光驱动的热精力存储,显示它为在太阳能的利用和存储的应用的大潜力。 | Guoqiang Qi Jie Yang Ruiying Bao Dongyun Xia Min Cao Wei Yang Mingbo Yang Dacheng Wei | 2017 | Nano Research2017，10，3： | 18 |
| 3 | Impact of the Three Gorges Project operation on the water exchange between Dongting Lake and the Yangtze River显示文摘The Three Gorges Project(TGP) is a world known project to utilize and manage the water resources of the Yangtze River. The reservoir stores water at the end of the flood season, and replenishes downstream reaches with water in dry seasons. In addition to such benefits, the TGP has irreversibly changed the hydrological process and the river-lake relation of the middle and lower reaches. In this paper, a hydrodynamic model was established to quantify the impact of the TGP's operation on the water exchange between Dongting Lake and the Yangtze River during 2009-2013. The results indicated that:the operation of the TGP has considerably reduced the peak discharge and the flood volume of the main stream and the Dongting Lake area. The inflow volume from the Yangtze River to Dongting Lake via three outlets decreased by 1.9-3.5 billion m^3/yr, while the outflow volume from Dongting Lake to the Yangtze River at Chenglingji increased by 0.3-1.6 billion m^3 in September and 0.4-0.6 billion m^3 in October,respectively. This research provides valuable information for flood control, irrigation, and water allocation in the middle and lower reaches of the Yangtze River, and serves as a typical case for investigating the impact of other hydropower projects around the world. | Minglong Dai Jun Wang Mingbo Zhang Xi Chen | 2017 | International Journal of Sediment Research2017，32，4： | 14 |
| 4 | Spin-decoupled metasurface for simultaneous detection of spin and orbital angular momenta via momentum transformation显示文摘With inherent orthogonality,both the spin angular momentum(SAM)and orbital angular momentum(OAM)of photons have been utilized to expand the dimensions of quantum information,optical communications,and information processing,wherein simultaneous detection of SAMs and OAMs with a single element and a single-shot measurement is highly anticipated.Here,a single azimuthal-quadratic phase metasurface-based photonic momentum transformation(PMT)is illustrated and utilized for vortex recognition.Since different vortices are converted into focusing patterns with distinct azimuthal coordinates on a transverse plane through PMT,OAMs within a large mode space can be determined through a single-shot measurement.Moreover,spin-controlled dual-functional PMTs are proposed for simultaneous SAM and OAM sorting,which is implemented by a single spin-decoupled metasurface that merges both the geometric phase and dynamic phase.Interestingly,our proposed method can detect vectorial vortices with both phase and polarization singularities,as well as superimposed vortices with a certain interval step.Experimental results obtained at several wavelengths in the visible band exhibit good agreement with the numerical modeling.With the merits of ultracompact device size,simple optical configuration,and prominent vortex recognition ability,our approach may underpin the development of integrated and high-dimensional optical and quantum systems. | Yinghui Guo Shicong Zhang Mingbo Pu Qiong He Jinjin Jin Mingfeng Xu Yaxin Zhang Ping Gao Xiangang Luo | 2021 | Light(Science & Applications)2021，10，4： | 14 |
| 5 | Synthesis of condensed polynuclear aromatic resin from furfural extract oil of reduced-pressure route Ⅱ显示文摘As an industrial byproduct of oil refining,furfural extract oil from reduced-pressure route Ⅱ with high aromatic content was used to prepare heat-resistant condensed polynuclear aromatic(COPNA) resin for the first time.The basic properties of furfural extract oil and the resultant COPNA resin were characterized by infrared spectroscopy(FT-IR),nuclear magnetic resonance spectroscopy(1H-NMR),thermogravimetric analysis(TGA) and elemental analysis(EA).The result showed that heat treated furfural extract oil was successfully used for the synthesis of heat-resistant COPNA resin.The average structural parameters of raw materials and prepared resin were calculated by the improved Brown-Ladner method,and the averaged molecular structure of the resin was obtained.The reaction mechanism for the synthesis of COPNA resin was suggested as an acid-catalyzed positive ion type polymerization. | Wu Mingbo Jiang Wei Wang Yuwei Li Shibin Zheng Jingtang | 2013 | Petroleum Science2013，10，4： | 10 |
| 6 | Analysis of the cracks formation on surface of extruded magnesium rod based on numerical modeling and experimental verification显示文摘To reduce the surface cracks of extrusion rod for AZ31 magnesium caused by nonho-mogeneous metal flow in extrusion process, 3D computer finite element (FE) simulations of extruding a wrought magnesium alloy AZ31 into rods have been performed and the results have been verified in extrusion experiments under identical conditions. The tendency to generate the dead zone is decreased by employing the die angle 60° at the cone-shaped die comparing with the die angle 180°. The surface additional tensile stresses of the rod at the die exit are decreased greatly so that the surface cracks caused are avoided by using the die angle 60°. The extrusion die with die angle 180° would increase the higher temperature rise and possibility of crack forma- tion on the rod surface that caused by die angle 60° and temperature rise decrease tensile strength of the AZ31 rod. The experimental results show that die angle 180° could cause continuous cracks on the surface of the extruded rod. The extrusion force required is reduced approximately 15 ton by employing the die angle 60°. Theoretical results obtained by the DeformTM-3D simulation agreed well with the experiments. The obtained results provide the fundamental and also practical guidelines for the design and correction of dies to produce magnesium rod with good surface quality. | Hongjun HU Dingfei ZHANG Fusheng PAN Mingbo YANG | 2009 | Acta Metallurgica Sinica(English Letters)2009，22，5： | 9 |
| 7 | Multi-scale strength analysis of bolted connections used in integral thermal protection system显示文摘Efficient and accurate strength analysis of bolted connections is essential in analyzing the integral thermal protection system(ITPS) of hypersonic vehicles, since the system bears severe loads and structural failures usually occur at the connections. Investigations of composite mechanical properties used in ITPS are still in progress as the architecture of the composites is complex. A new method is proposed in this paper for strength analysis of bolted connections by investigating the elastic behavior and failure strength of three-dimensional C/C orthogonal composites used in ITPS. In this method a multi-scale finite element method incorporating the global–local method is established to ensure high efficiency in macro-scale and precision in meso-scale in analysis.Simulation results reveal that predictions of material properties show reasonable accuracy compared with test results. And the multi-scale method can analyze the strength of connections efficiently and accurately. | Heng LIANG Yuqing WANG Mingbo TONG Junhua ZHANG | 2018 | Chinese Journal of Aeronautics2018，31，8： | 8 |
| 8 | High temperature and high pressure rheological properties of high-density water-based drilling fluids for deep wells显示文摘To maintain tight control over rheological properties of high-density water-based drilling fluids, it is essential to understand the factors influencing the rheology of water-based drilling fluids. This paper examines temperature effects on the rheological properties of two types of high-density water-based drilling fluids (fresh water-based and brine-based) under high temperature and high pressure (HTHP) with a Fann 50SL rheometer. On the basis of the water-based drilling fluid systems formulated in laboratory, this paper mainly describes the influences of different types and concentration of clay, the content of a colloid stabilizer named GHJ-1 and fluid density on the rheological parameters such as viscosity and shear stress. In addition, the effects of aging temperature and aging time of the drilling fluid on these parameters were also examined. Clay content and proportions for different densities of brine-based fluids were recommended to effectively regulate the rheological properties. Four rheological models, the Bingham, power law, Casson and H-B models, were employed to fit the rheological parameters. It turns out that the H-B model was the best one to describe the rheological properties of the high-density drilling fluid under HTHP conditions and power law model produced the worst fit. In addition, a new mathematical model that describes the apparent viscosity as a function of temperature and pressure was established and has been applied on site. | Wang Fuhua Tan Xuechao Wang Ruihe Sun Mingbo Wang Li Liu Jianghua | 2012 | Petroleum Science2012，9，3： | 8 |
| 9 | Symmetry breaking of photonic spin-orbit interactions in metasurfaces显示文摘Spin-orbit optical phenomena pertain to the wider class of electromagnetic effects originating from the interaction of the photon spin with the spatial structure and propagation characteristics of an optical wave,mediated by suitable optical media.There are many emerging photonic applications of spin-orbit interactions(SOI)of light,such as control of the optical wave propagation via the spin,enhanced optical manipulation,and generation of structured optical fields.Unfortunately,current applications are based on symmetric SOI,that is,the behaviours of polarized photons with two opposite spins are opposite,leading to the limit of spin-based multiplexers.The symmetry of SOI can be broken in our proposed metasurfaces,consisting of spatially varying birefringence,which can arbitrarily and independently build SOI for two opposite spins without reduction of optical energy usage.We obtain three kinds of dual-functional metasurfaces at visible and infrared wavelengths with high efficiency.Our concept of generation of asymmetric SOI for two spins,using anisotropic metasurfaces,will open new degrees of freedoms for building new types of spin-controlled multifunctional shared-aperture devices for the generation of complex structured optical fields. | Fei Zhang Mingbo Pu Jun Luo Honglin Yu Xiangang Luo | 2017 | 光电工程2017，44，3： | 8 |
| 10 | Modification and refinement mechanism of Mg_2Si phase in Sr-containing AZ61-0.7Si magnesium alloy显示文摘The effect of Sr on modification and refinement of the Mg 2 Si phase in an AZ61-0.7Si magnesium alloy has been investigated and analyzed.The results indicate that Sr can effectively modify and refine the Chinese-script shaped Mg2Si phase in the AZ61-0.7Si alloy.By adding 0.06wt.%-0.12wt.%Sr to AZ61-0.7Si alloy,the Mg2Si phase in the alloy can be changed from the initial coarse Chinese-script shape to fine granule and/or irregular polygonal shapes.Accordingly,the Sr-containing AZ61-0.7Si alloy exhibits higher tensile and creep properties than the AZ61-0.7Si alloy without Sr modification.The mechanism on modification and refinement of the Mg2Si phase in Sr-containing AZ61-0.7Si alloy is possibly related to the following two aspects:(1)adding Sr may form the Al4Sr phase which can serve as the heterogeneous nucleus for the Mg2Si particles and/or(2)adding Sr may lower the onset crystallizing temperature and increase the undercooling level. | Yang Mingbo Shen Jia | 2009 | China Foundry2009，6，1： | 7 |
| 11 | Off-axis multi-wavelength dispersion controllingmetalens for multi-color imaging显示文摘Dispersion control is crucial in optical systems,and chromatic aberration is an important factor affecting imaging quality in imaging systems.Due to the inherent property of materials,dispersion engineering is complex and needs to trade off other aberration in traditional ways.Although metasurface offers an effective method to overcome these limits and results in well-engineered dispersion,off-axis dispersion control is still a challenging topic.In this paper,we design a single-layer metalens which is capable of focusing at three wavelengths(473 nm,532 nm,and 632 nm)with different incident angles(0°,-17°and 17°)into the same point.We also demonstrate that this metalens can provide an alternative for the bulky color synthetic prism in a 3-chips digital micromirror device(DMD)laser projection system.Through this approach,various off-axis dispersion controlling optical devices could be realized. | Kaihua Dou Xin Xie Mingbo Pu Xiong Li Xiaoliang Ma Changtao Wang Xiangang Luo | 2020 | Opto-Electronic Advances2020，3，4： | 7 |
| 12 | Experimental investigation on transverse jet penetration into a supersonic turbulent crossflow显示文摘The paper evaluates the evolvement of coherent structures and penetration height of gaseous transverse jet penetration into a supersonic turbulent flow.The high spatiotemporal resolution coherent structures of the jet plume are obtained by utilizing the nanoparticle-based planar laser scattering technique(NPLS).The evolving pattern of the coherent structures generated on the upwind surface of the transverse jet is analyzed based on the NPLS images.The shedding eddies from the jet near-field have lower convection velocity along freestream direction,while vortex growth rate is apparently higher than the far-field.Farther downstream,the large-scale eddies have less deformation and translate at velocities near the freestream velocity.Thus the near-field determines the scale of eddies in the far-field and affects the whole mixing process.The effect of injection stagnation pressure on the coherent structures is discussed and a modified penetration correlation is proposed based on an edge approximation definition and least square method with various injection pressures. | SUN MingBo ZHANG ShunPing ZHAO YanHui ZHAO YuXin LIANG JianHan | 2013 | Science China(Technological Sciences)2013，56，8： | 7 |
| 13 | Theoretical analysis of flamelet model for supersonic turbulent combustion显示文摘Being physically intuitionistic and computationally efficient,the flamelet model has obtained increasing attention and becomes popular in numerical simulations of supersonic combustion.However,the flamelet model was firstly built for simulations of the low-speed flows.Therefore it is still unclear whether the assumption of the flamelet model is reasonable in supersonic combustion.This paper tries to identify the existence of the flamelet mode in supersonic combustion.Firstly,the interaction of the turbulent fluctuation and the flame is discussed,based on which the combustion regime is distinguished.Then the charac-teristic length scale of the turbulent flows and the combustion inside the scramjet combustor are calculated and compared,which are used to identify whether the assumption of the flamelet model is reasonable in supersonic flows.The results show that for premixed combustion,due to the low fluctuation velocity in the recirculation zone and the shear layer,the assumption of the flamelet model is established for all the flight Mach numbers,while for non-premixed combustion the assumption is also established for most of the flight Mach numbers except for very high Mach number under which the slow reaction mode dominates the combustion.In order to quantitatively examine the combustion mode,numerical calculations are performed to simulate the strut-injection supersonic combustion which has been experimentally investigated in German Aerospace Center.The results show that the supersonic combustion occurs in the fully-developed turbulent regions and the assumption of the flamelet model is established in the whole flow field. | FAN ZhouQin LIU WeuDong SUN MingBo WANG ZhenGuo ZHUANG FengChen LUO WenLei | 2012 | Science China(Technological Sciences)2012，55，1： | 7 |
| 14 | Analysis of surface orange peel of aluminum-alloy automobile sheet by using of EBSD and X-ray diffraction显示文摘The formation cause of orange peel of aluminum-alloy automotive sheet after tensile deformation was analysed by using X-ray diffraction and electron back-scattered diffraction(EBSD).The test results showed that formation cause of surface orange peel after tensile deformation related to product texture and nonuniform deformation during the tensile process.The grain size has significant effect on deformation uniform and texture formation.Coarse grains were easy to produce nonuniform deformation and texture,which would produce surface orange peel after tensile deformation. | Ma Mingtu Sun Zhifu Wang Zhiwen Lu Hongzhou Zhou Mingbo | 2012 | Engineering Sciences2012，10，6： | 7 |
| 15 | Synthesis and Characterization of Condensed Polynuclear Aromatic Resin Derived from Ethylene Tar显示文摘As a kind of low-cost and readily available industrial byproduct, ethylene tar (ET) was for the first time utilized for the preparation of heat-resistant condensed polynuclear aromatic resin (COPNAR). The basic properties of ET and the resulted COPNAR were characterized by FT-IR, 1H-NMR, TGA and elemental analysis. The test results showed that ET with high aromatic content (>50%) was suitable for the synthesis of COPNAR with superior heat resistance. The average molecular structure of ET was obtained by means of the improved Brown-Ladner method, and the reaction mechanism was considered as an acid-catalyzed positive ion-typed polymerization. Our findings have provided a new route to develop ET into technology-added heat-resistant resins. | Wu Mingbo Shi Yangyang Li Shibin Wang Yuwei Tan Minghui Wang Ding Zheng Jingtang Tsubaki Noritatsu | 2012 | China Petroleum Processing & Petrochemical Technology2012，14，4： | 7 |
| 16 | Expression of cyclooxygenase-2 and its pathogenic effects in nonalcoholic fatty liver disease显示文摘Objective:To investigate the expression of cyclooxygenase-2 and its pathological effect in the experimental nonalcoholic fatty liver of rats,and to explore its possible mechanism.Methods:The rat NAFLD model was established by giving a fat-enriched diet.The blood samples were obtained form abdominal aorta and the levels of serum ALT,AST and IL-1,changes in the hepatic tissue 6-k-PGF1α TXB2 were measured.The expression level of COX-2 in rats livers were assayed by immunohistochemistry,RT-PCR and Western-blot.Results:Light microscope analysis revealed that hepatocytes were injured in the model group and slightly in the treatment group.The levels of serum TXB2 and IL-1 in the fatty liver rats were increased.Compared with the model group,the IL-1 and TXB2 increased significantly(P < 0.05),on the contrary,compared with the normal group,the hepatic tissue 6-Keto-prostagland decreased significantly in the model group(P < 0.05),the treatment group also increased but P > 0.05.There was no positive expression of COX-2 in hepatic tissue of normal rats.In the model group,there was positive expression of COX-2 antigen and the number of COX positive cells progressively increased at 4,8,12 wks.The intensity of expression of COX-2 had significantly increased(P < 0.05)and the intensity of COX-2 expression in the treated group decreased remarkably compared with the model group(P < 0.05).The expression of COX-2 mRNA and the level of COX-2 protein were significantly stronger in the liver of model rats compared with normal rats,and significantly weaker in treated rats,than in 8W and 12W model rats(P < 0.05).Conclusion:The increase of COX-2 expression in NAFLD is closely associated with the severity of liver inflammation and damage.COX-2 may play an important role in the progression of rat NAFLD,and the expression of COX-2 mRNA is downregulated by cyclooxygenase-2 inhibitor,which can depress the oxidative stress and control inflammatory response efficiently. | Mingbo Cao Lei Dong Xiaolan Lu Jinyan Luo | 2008 | Journal of Nanjing Medical University2008，22，2： | 7 |
| 17 | Crosstalk-free achromatic full Stokes imaging polarimetry metasurface enabled by polarization-dependent phase optimization显示文摘Imaging polarimetry is one of the most widely used analytical technologies for object detection and analysis.To date,most metasurface-based polarimetry techniques are severely limited by narrow operating bandwidths and inevitable crosstalk,leading to detrimental effects on imaging quality and measurement accuracy.Here,we propose a crosstalkfree broadband achromatic full Stokes imaging polarimeter consisting of polarization-sensitive dielectric metalenses,implemented by the principle of polarization-dependent phase optimization.Compared with the single-polarization optimization method,the average crosstalk has been reduced over three times under incident light with arbitrary polarization ranging from 9μm to 12μm,which guarantees the measurement of the polarization state more precisely.The experimental results indicate that the designed polarization-sensitive metalenses can effectively eliminate the chromatic aberration with polarization selectivity and negligible crosstalk.The measured average relative errors are 7.08%,8.62%,7.15%,and 7.59%at 9.3,9.6,10.3,and 10.6μm,respectively.Simultaneously,the broadband full polarization imaging capability of the device is also verified.This work is expected to have potential applications in wavefront detection,remote sensing,light-field imaging,and so forth. | Yaxin Zhang Mingbo Pu Jinjin Jin Xinjian Lu Yinghui Guo Jixiang Cai Fei Zhang Yingli Ha Qiong He Mingfeng Xu Xiong Li Xiaoliang Ma Xiangang Luo | 2022 | Opto-Electronic Advances2022，5，11： | 6 |
| 18 | All‐metallic wide‐angle metasurfaces for multifunctional polarization manipulation显示文摘Optical camouflage is a magical capability of animals as first noticed in 1794 by Erasmus Darwin in Zoonomia,but current biomimetic camouflage strategies cannot be readily applied in complex environments involving multispectral and in particular multi-polarization detection.Here we develop a plasmonic approach toward broadband infrared polarimetric crypsis,where the polarized thermal emission near the pseudo-Brewster angle is the main signal source and no existing polarizing camouflage technique has been discovered in nature.Based on all-metallic subwavelength structures,an electrodynamic resistance-reduction mechanism is proposed to avoid the significant polarization-dependent infrared absorption/radiation.It is also found that the structured metal surface presents giant extrinsic anisotropy regarding the phase shift between orthogonal polarization states,which helps to realize ultrahigh-efficiency and tunable polarization conversion in an unprecedented manner.Finally,we note that the catenary optical theory may provide a useful means to explain and predict these unusual performances. | Xiaoliang Ma Mingbo Pu Xiong Li Yinghui Guo Xiangang Luo | 2019 | Opto-Electronic Advances2019，2，3： | 6 |
| 19 | A hybrid LES (Large Eddy Simulation)/assumed sub-grid PDF (Probability Density Function) model for supersonic turbulent combustion显示文摘A hybrid LES (Large Eddy Simulation)/assumed sub-grid PDF (Probability Density Function) closure model has been devel-oped for supersonic turbulent combustion. Scalar transport equations for all species in a given chemical kinetic mechanism were solved, which are necessary in the supersonic combustion where the non-equilibrium chemistry is essentially involved. The clipped Gaussian PDF of temperature and multivariate ? PDF of composition were used to close the sub-grid chemical sources that appear in the conservation equations. The sub-grid variances of temperature and composition were constructed based on scale similarity approach. A semi-implicit approach based on the PDF model was proposed to tackle the resulting numerical stiffness associated with finite rate chemistry. The model was applied to simulate a supersonic, coaxial H2-air burner, where both the mean and rms (root mean square) results were compared with the experimental data. In general, good agree-ments were achieved, which indicated that the present sub-grid PDF method could work well in simulating supersonic turbu-lent combustion. Moreover, the calculation showed that the sub-grid fluctuations of temperature and major species in the combustion region were of the order of 10%-20% of their rms, while the sub-grid fluctuation of hydroxyl might be as high as 40%-50% of its rms. | WANG HongBo QIN Ning SUN MingBo WU HaiYan WANG ZhenGuo | 2011 | Science China(Technological Sciences)2011，54，10： | 6 |
| 20 | Improvements of heat resistance and adhesive property of condensed poly-nuclear aromatic resin via epoxy resin modification显示文摘A bisphenol epoxy resin was used as modifier to increase the heat resistance of condensed poly-nuclear aromatic(COPNA) resin. The basic properties of COPNA resin and modified resin were characterized by Fourier transform infrared spectroscopy(FT-IR), nuclear magnetic resonance spectroscopy(1H-NMR), vapor pressure osmometry(VPO) and elemental analysis(EA). Average structural parameters of resins were calculated by the improved Brown-Ladner method, and heat resistance of resins was tested by thermogravimetric analysis(TGA). The chemical structure, mechanical properties and heat resistivity of the resin/graphite composites prepared with different resins were compared. The results show that the adhesive property and heat resistance of COPNA resin can be remarkably improved by addition of 5 wt.% epoxy resin. The reason is that the reactions between epoxy groups of epoxy resin and hydroxyl groups of COPNA resin improve the heat resistance and adhesive property of COPNA resin. Electric motor brushes with good mechanical properties and low electrical resistivity were successfully prepared by using the modified resin as binder. | Wu Mingbo Wang Yuwei Jiang Wei Li Shibin Sun Qiqian Zheng Jingtang Qiu Jieshan | 2014 | Petroleum Science2014，11，4： | 5 |
您所在的机构暂未开通此部分的功能，请联系管理员