|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | Preparation,Characterization and Comparative NH_3-sensing Characteristic Studies of PANI/inorganic Oxides Nanocomposite Thin Films显示文摘Polyaniline (PANI), polyaniline/titanium dioxide (PANI/TiO2), polyaniline/tin oxide (PANI/SnO2) and polyani- line/indium oxide ℃(PANI/In2O3) thin films were developed by using an in-situ self-assembly method at ~10℃. Chemical structure, optical property and morphology of all the thin films were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, UV-Vis absorption spectroscopy, scanning electron mi- croscopy (SEM) and transmission electron microscopy (TEM). NH3 gas-sensing properties of PANI and PANI nanocomposite thin films were examined at ambient temperature. The results showed that all the sensors composed of PANI nanocomposite thin films had faster response/recovery rate with better reproducibility, selectivity and long-term stability to NH3 than PANI thin film sensor, and PANI/TiO2 nanocomposite thin film sensor showed optimum NH3 gas-sensing characteristics. The effect of humidity on the responses of all the sensors was also investigated. | Hulling Tai Yadong Jiang Cuangzhong Xie Junsheng Yu | 2010 | Journal of Materials Science & Technology2010，26，7： | 7 |
| 2 | Investigation on the fabrication of lightweight aggregate with acid-leaching tailings of vanadium-bearing stone coal minerals and red mud显示文摘Proper treatment of acidleaching tailings(ALTs)of vanadiumbearing stone coal minerals is of great urgency.One approach is adding it into the raw materials during the preparation of lightweight aggregate(LWA).But clay is always needed.In this paper,another solid waste,red mud,was mixed with ALTs as a source of flux components instead of clay.Evaluation of the physical characteristics,morphological structures,as well as crystal phases during the sintering process were investigated.When their mixtures with a proper ratio were sintered at 1080℃,a glassy phase with certain viscosity was formed,and the gases generated simultaneously were encapsulated by the melt.Finally,LWA with a onehour water absorption as low as 1.46%,a bulk density as low as 728.76 kgm 3 and a compressive strength as high as 10.77 MPa was fabricated. | Chunguang Song Hongling Zhang Yuming Dong Lili Pei Honghui Liu Junsheng Jiang Hongbin Xu | 2021 | Chinese Journal of Chemical Engineering2021，34，4： | 6 |
| 3 | Red organic light emitting device with improved performance using a novel fluorescent dye codoped with phosphor-sensitizer显示文摘Efficient red organic light-emitting device consisted of a compound fluorescent-phosphor-sensitized emission layer was fabricated. A novel red fluorescent dye, 3-(dicyanomethylene)-5,5-dimethyl-1-(4-dimethylamino-styryl) cyclohexene (DCDDC), and a green phosphorescent dye, fac tris(2-phenylpyridine) iridium [Ir(ppy)3] were codoped into a host material 4,4'-N,N'-dicarbazolebiphe-nyl (CBP). By adjusting the component ratio of doping system, a series of devices with different concentration proportion of Ir(ppy)3:DCDDC were constructed. The results demonstrated that the device with 0.2 wt% DCDDC had a maximum power effi-ciency (ηp) of 2.12 lm/W at a current density of 0.1 mA/cm2, which was about 38% higher than that of conventional fluorescent device. When at a current density of 4 mA/cm2 (100 cd/m2) and 52 mA/cm2 (1000 cd/m2), the ηp percentage was about 160% and 143% higher than that of conventional device, respectively. A stable red light emission at a peak of 615 nm with Commissions Internationale de l'Eclairage coordinates near the region of (0.56, 0.42) in a wide bias range was also obtained. The improved performances were attributed to the efficient multiple-stage energy transfer from the host to the guest and the suppression of loss mechanism. | WEN Wen YU JunSheng HU Yuan JIANG YaDong | 2010 | Chinese Science Bulletin2010，55，24： | 3 |
| 4 | Geochemistry and Geochronology of the Gebunongba Iron Polymetallic Deposit in the Gangdese Belt, Tibet显示文摘The Gebunongba iron polymetallic deposit is a typical skarn deposit located at the westernmost end of the discovered iron polymetallic deposits in the Gangdese metallogenic belt. Major and trace elements of the monzonite granite related to mineralization show that these rocks are peraluminous(ACNK=1.15–1.21) and are rich in Si(76.63 wt.%–76.93 wt.% SiO2), K(K2 O/Na2 O ratio of 1.80–2.30), LREE and LILEs(Rb, Ba, Th, U, Pb), but is depleted in high field strength elements(Nb, Ta, Ti and HREE). In addition, these rocks show obviously negative Eu anomalies(δEu=0.48–0.55). The LA-ICPMS U-Pb age of zircons in monzonite granite is 59.72±0.55 Ma(MSWD=0.79), whereas the 40 Ar/39 Ar age of muscovite in iron ores is 59.22±0.61 Ma(MSWD=16.20). This indicates that the deposit formed at the syn-collision stage of Lhasa-India terrane is later than the northward subduction of the Yajiang crust. The monzonite granite has been probably derived from the partial melting of ancient lower crustal materials, which is probably resulted from the underplating of mantle-derived magmas. It is favorable for the formation of iron polymetallic deposit. Iron polymetallic mineralization is prevalent in Gangdese metallogenic belt at syn-collision stage. Therefore, syn-collision stage is an important mineralization stage for iron polymetallic deposits. The results of this study proved that iron polymetallic mineralization still took place in the western segment of Gangdese metallogenic belt and provided basis for further prospecting the deposits of the same type. | Shunbao Gao Youye Zheng Junsheng Jiang Kan Tian Jin Xu | 2019 | Journal of Earth Science2019，30，2： | 3 |
| 5 | Polaron-pair-dependent equivalent circuit parameters of organic solar cells based on CuPc and C_(60)显示文摘We present the current-voltage characteristics of organic solar cells based on single and double heterojunction of copper phthalocyanine (CuPc) and C60 by introducing a constant JP instead of photo-current density Jph to represent the density of polaron-pairs generated from excitons at D/A interface. A diode Dext models polaron-pair dissociation, and a diode Drec stands for loss due to polaron-pair recombination. The photovoltaic response under AM 1.5 solar illumination at an intensity of 100 mW/cm2 is parameterized and modeled using the improved equivalent circuit model developed for inorganic pn-junction solar cells. The instinct mechanisms including dissociation, recombination of polaron-pairs and charge carrier collection process are explained by introducing Jph/JP as the dissociation rate of polaron-pairs and |J|/Jph as charge carrier application efficiency ηCA. Especially, we reveal the optimization mechanism for the fill factor FF and series resistance RS of organic solar cells. | HUANG Jiang YU JunSheng LIN Hui JIANG YaDong | 2010 | Chinese Science Bulletin2010，55，13： | 3 |
| 6 | Optimization model of a structural simulation design for a CICC显示文摘The engineering design of a Cable-In-Conduit Conductor (CICC) is complicated. A model for the optimal design of a CICC based on conductor stability, AC loss and strain is proposed. The model considers the critical current density as a function of applied strain. A mathematical programming method that minimizes the AC loss of the CICC is established to yield an optimal design for the CICC structure. The optimized structure and related performance agree well with the engineering design values used for the KSTAR project. | JIANG HuaWei WU SongTao CHENG JunSheng | 2011 | Chinese Science Bulletin2011，56，27： | 2 |
| 7 | High-efficiency white organic light-emitting diodesbased on phosphorescent iridium complex and 4,4prime-Bisbiphenyl e-mitters显示文摘 | JIANG Yadong WANG Jun YU Junsheng | 2007 | Jpn J Appl Phys Part 1:Regular Papersand Short Notes and Review Papers2007，46，2： | 1 |
| 8 | Film thickness influence of dual iridium complex ultrathin layers on the performance of nondoped white organic light-emitting diodes显示文摘 | Junsheng Yu Wei Zhang Wen Wen Hui Lin Yadong Jiang | 2011 | Displays2011，，2： | 1 |
| 9 | Study on temperature characteristics of organic light-emitting diodes based on tris-(8-hydroxylquinoline)-aluminum显示文摘Both single-layer and double-layer organic light-emitting devices based on tris-(8-hydroxylquinoline)-aluminum(Alq3) as emitter are fabricated by thermal vacuum deposition.The electroluminescent characteristics of these devices at various temperatures are measured,and the temperature characteristics of device performance are studied.The effect of temperature on device current conduction regime is analyzed in detail.The results show that the current-voltage(I-V) characteristics of devices are in good agreement with the theoretical prediction of trapped charge limited current(TCLC).In addition,both the charge carrier mobility and charge carrier concentration in the organic layer increase with the rise of temperature,which results in the monotonous increase of Alq3 device current.The current conduction mechanisms of two devices at different temperatures are identical,but the exponent m in current-voltage equation changes randomly with temperature.The device luminance increases slightly and the efficiency decreases monotonously due to the aging of Alq3 luminescent properties caused by high temperature.A tiny blue shift can be observed in the electroluminescent(EL) spectra as the temperature increases,and the reduction of device monochromaticity is caused by the intrinsic characteristics of organic semiconductor energy levels. | SUO Fan YU JunSheng LI WeiZhi LOU ShuangLing DENG Jing JIANG YaDong | 2008 | Chinese Science Bulletin2008，53，4： | 1 |
| 10 | Al2Cu/α-Al composite coating prepared by plasma surface metallurgy显示文摘 | Liu Junbo Wang Limei Jiang Junsheng | 2008 | Materials Letters2008，62，2008： | 1 |
| 11 | RAF22,ABI1 and OST1 form a dynamic interactive network that optimizes plant growth and responses to drought stress in Arabidopsis显示文摘Plants adapt to their ever-changing environment via positive and negative signals induced by environmental stimuli.Drought stress,for instance,induces accumulation of the plant hormone abscisic acid(ABA),triggering ABA signal transduction.However,the molecular mechanisms for switching between plant growth promotion and stress response remain poorly understood.Here we report that RAF(rapidly accelerated fibrosarcoma)-LIKE MITOGEN-ACTIVATED PROTEIN KINASE KINASE KINASE 22(RAF22)in Arabidopsis tha/iana physically interacts with ABA INSENSITIVE 1(ABl1)and phosphorylates ABl1 at Ser416 residue to enhance its phosphatase activity.Interestingly,ABl1 can also enhance the activity of RAF22 through dephosphorylation,reciprocally inhibiting ABA signaling and promoting the maintenance of plant growth under normal conditions.Under drought stress,however,the ASA-activated OPEN STOMATA1(OST1)phosphorylates the Ser81 residue of RAF22 and inhibits its kinase activity,restraining its enhancement of ABl1 activity.Taken together,our study reveals that RAF22,ABl1,and OST1 form a dynamic regulatory network that plays crucial roles in optimizing plant growth and environmental adaptation under drought stress. | Zhihui Sun Zhenkai Feng Yanglin Ding Yuanpeng Qi Shan Jiang Zhen Li Yu Wang Junsheng Qi Chunpeng Song Shuhua Yang Zhizhong Gong | 2022 | Molecular Plant2022，15，7： | 1 |
| 12 | Preparation of high nitrogen and nickel-free austenitic stainless steel by powder injection molding显示文摘High nitrogen and nickel-free austenitic stainless steel has received much recognition worldwide because it can solve the problem of 'nickel-allergy' and has outstanding mechanical and physical properties. In this article, 0Cr17Mn11Mo3N was prepared by powder injection molding (PIM) technique accompanied with solid-nitriding. The results show that the critical solid loading can achieve up to 64vol% by use of gas-atomized powders with the average size of 17.4 μm. The optimized sintering conditions are de-termined to be 1300°C, 2 h in flowing nitrogen atmosphere, at which the relative density reaches to 99% and the N content is as high as 0.78wt%. After solution annealing at 1150°C for 90 min and water quench, the 0.2% yield strength, ultimate tensile strength (UTS), elongation, reduction in area, and hardness can reach as high as 580 MPa, 885 MPa, 26.0%, 29.1%, and Hv 222, respectively. | Dawei Cui Junsheng Jiang Guangming Cao Enzhong Xiao Xuanhui Qu | 2008 | Journal of University of Science and Technology Beijing2008，15，2： | 1 |
| 13 | Product platform design for a product family based on Kansei engineering显示文摘 | Kuang Junsheng Jiang Pingyu | | 0，，06： | 1 |
| 14 | Combined host–guest doping and host-free systems for high-efficiency white organic light-emitting devices显示文摘 | Juan Zhao Junsheng Yu Shengqiang Liu Yadong Jiang | 2012 | Journal of Luminescence2012，，8： | 1 |
| 15 | A flying gauge change model in tandem cold strip mill 显示文摘 | WANG Junsheng JIANG Zhengyi | 2008 | Journal of Materials Processing Technology2008，204，： | 1 |
| 16 | A flying gauge change model in tandem cold strip mill显示文摘 | WANG Junsheng JIANG Zhengyi | 2008 | Journal of Materials Processing Technology2008，204，： | 1 |
| 17 | Fabrication and gas sensitivity of polyaniline–titanium dioxide nanocomposite thin film显示文摘 | Huiling Tai Yadong Jiang Guangzhong Xie Junsheng Yu Xuan Chen | 2007 | Sensors & Actuators: B Chemical2007，，2： | 1 |
| 18 | A flying gauge change model in tandem cold strip mill 显示文摘 | WANG Junsheng JIANG Zhengyi | 2008 | Journal of Materials Processing Technology2008，204，： | 1 |
| 19 | Low Temperature DC Sputtering Deposition on Indium-Tin Oxide Film and Its Application to Inverted Top-emitting Organic Light-emitting Diodes显示文摘铟氧化亚锡(ITO ) 极端薄电影被 DC (直接水流) 在玻璃底层上准备有 H20 的帮助的磁控管劈啪作响技术避免潜在的表面损坏的蒸汽。电影性质被 X 光检查衍射(XRD ) 描绘技术,四点的探查方法和分光光度计。结果证明扔的 ITO 在劈啪作响期间与介绍 H2O 拍摄过程是几乎非结晶的。 100 nm ITO 电影的平均可见轻传播在85%附近,方形的抵抗力在 80 OMEGA/square.The 电影下面被用作透明阳极制作一转换有玻璃 substrate/Alq3 ( 40 nm )的结构的最高射出的器官的轻射出的二极管( IT-OLEDs ) /NPB ( 15 nm ) /CuPc ( x nm ) /IT0 阳极( 100 nm ),在 CuPc 的电影厚度被优化的地方。这 IT-OLEDs 的发光性被在 100 cd/m2 增加 0.24 Im/W 的 CuPc,和发光性效率的厚度从 25 cd/m2 改进到超过 527 cd/m2,这被发现被获得,它显示 CuPc 层的优化厚度在 15 nm 附近。 | Hui LIN Junsheng YU Shuangling LOU Jun WANG Yadong JIANG | 2008 | Journal of Materials Science & Technology2008，24，2： | 1 |
| 20 | Product platform design for a product family based on Kansei engineering 显示文摘 | KUANG Junsheng JIANG Pingyu | 2009 | Journal of Engineering Design2009，20，6： | 1 |
您所在的机构暂未开通此部分的功能，请联系管理员