|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | Control of aliphatic halogenated DBP precursors with multiple drinking water treatment processes: Formation potential and integrated toxicity显示文摘The comprehensive control efficiency for the formation potentials(FPs) of a range of regulated and unregulated halogenated disinfection by-products(DBPs)(including carbonaceous DBPs(C-DBPs), nitrogenous DBPs(N-DBPs), and iodinated DBPs(I-DBPs)) with the multiple drinking water treatment processes, including pre-ozonation, conventional treatment(coagulation–sedimentation, pre-sand filtration), ozone-biological activated carbon(O_3-BAC) advanced treatment, and post-sand filtration, was investigated. The potential toxic risks of DBPs by combing their FPs and toxicity values were also evaluated.The results showed that the multiple drinking water treatment processes had superior performance in removing organic/inorganic precursors and reducing the formation of a range of halogenated DBPs. Therein, ozonation significantly removed bromide and iodide,and thus reduced the formation of brominated and iodinated DBPs. The removal of organic carbon and nitrogen precursors by the conventional treatment processes was substantially improved by O_3-BAC advanced treatment, and thus prevented the formation of chlorinated C-DBPs and N-DBPs. However, BAC filtration leads to the increased formation of brominated C-DBPs and N-DBPs due to the increase of bromide/DOC and bromide/DON.After the whole multiple treatment processes, the rank order for integrated toxic risk values caused by these halogenated DBPs was haloacetonitriles(HANs)》haloacetamides(HAMs) >haloacetic acids(HAAs) > trihalomethanes(THMs) > halonitromethanes(HNMs) 》I-DBPs(I-HAMs and I-THMs). I-DBPs failed to cause high integrated toxic risk because of their very low FPs. The significant higher integrated toxic risk value caused by HANs than other halogenated DBPs cannot be ignored. | Yimeng Zhang Wenhai Chu Dechang Yao Daqiang Yin | 2017 | Journal of Environmental Sciences2017，29，8： | 15 |
| 2 | Bidding Strategy of a Virtual Power Plant Considering Carbon-electricity Trading显示文摘Virtual power plant(VPP)aggregates large amounts of distributed energy and controllable loads.The comprehensive consideration of carbon emissions and electricity transactions has great significance in improving the VPP operation’s economic efficiency.In this paper,the bidding strategy of the VPP by considering the carbon-electricity integration trading in an auxiliary service(AS)market is studied.First of all,the basic structure and operating features of the VPP are briefly introduced.Then,the bidding strategy model of carbon-electricity integration trading in an auxiliary service market is proposed and the corresponding objective function and the constraint conditions are also analyzed.Furthermore,the GAMS solver is utilized to give the optimal solution of the bidding strategy model.Finally,the effectiveness of the bidding strategy of a VPP based on the consideration of carbon-electricity integration trading is verified through simulation cases. | Dechang Yang Shaowen He Qiuyue Chen Dingqian Li Hrvoje Pandzic | 2019 | CSEE Journal of Power and Energy Systems2019，5，3： | 14 |
| 3 | Preparation and anisotropic properties of textured structural ceramics: A review显示文摘Ceramics are usually composed of randomly oriented grains and intergranular phases, so their properties are the statistical average along each direction and show isotropy corresponding to the uniform microstructures. Some methods have been developed to achieve directional grain arrangement and preferred orientation growth during ceramic preparation, and then textured ceramics with anisotropic properties are obtained. Texture microstructures give particular properties to ceramics along specific directions, which can effectively expand their application fields. In this review, typical texturing techniques suitable for ceramic materials, such as hot working, magnetic alignment, and templated grain growth(TGG), are discussed. Several typical textured structural ceramics including α-Al2O3 and related nacre bioinspired ceramics, Si3N4 and SiAlON, h-BN, MB2 matrix ultra-high temperature ceramics, MAX phases and their anisotropic properties are presented. | Zhuo ZHANG Xiaoming DUAN Baofu QIU Zhihua YANG Delong CAI Peigang HE Dechang JIA Yu ZHOU | 2019 | Journal of Advanced Ceramics2019，8，3： | 14 |
| 4 | Progress of a novel non-oxide Si-B-C-N ceramic and its matrix composites显示文摘In the past twenty years,Si-B-C-N ceramic has attracted wide attention due to its special structure and outstanding properties.The ceramic generally has an amorphous or a nano-crystalline structure,and has excellent structural stability,oxidation resistance,creep resistance and high-temperature mechanical properties,etc.Thus,Si-B-C-N ceramic attracts many researchers and finds potential applications in transportation,aerocraft,energy,information,microelectronics and environment,etc.Much work has been carried out on its raw materials,preparation processes,structural evolution,phase equilibrium and high-temperature properties.In recent years,many researchers focus on its new preparation methods,the preparation of dense ceramic sample with large dimensions,ceramic matrix composites reinforced by carbon fiber or SiC whisker,or components with various applications.Research on Si-B-C-N ceramic will develop our insight into the relationship between structures and properties of ceramics,and will be helpful to the development of novel high-performance ceramics.This paper reviews the preparation processes,general microstructures,mechanical,chemical,electrical and optical properties,and potential applications of Si-B-C-N ceramic,as well as its matrix composites. | Pengfei ZHANG Dechang JIA Zhihua YANG Xiaoming DUAN Yu ZHOU | 2012 | Journal of Advanced Ceramics2012，1，3： | 11 |
| 5 | Effects of heavy metal pollution of highway origin on soil nematode guilds in North Shenyang, China显示文摘Soil samples were collected with distance at 5,20,40,80,160,and 320 m from the Shen-Ha(Shenyang-Harbin) Highway,Northeast China,to investigate the effect of heavy metals of highway origin on soil nematode guilds.The contents of soil Pb,Cu,Zn,and the nematode community structure were analyzed.The results showed that the contents of total and available Pb,Cu,Zn varied significantly with the different distances from the highway.Pb was the main pollutant in the soils in the vicinity of Shen-Ha Highway.The zone from 20 to 40 m away from the highway was the most polluted area.The highest abundance of soil nematodes was found at 5 m while the lowest at 20 m away from the highway.Thirty six genera of nematodes belonging to 23 families were identified.Nematode guilds having different responses to soil heavy metals were classified into four types.Soil nematode guilds may act as a prominent indicator to heavy metal pollution of highway origin. | HAN Dechang ZHANG Xiaoke TOMAR Vijay Vikram Singh LI Qi WEN Dazhong LIANG Wenju | 2009 | Journal of Environmental Sciences2009，21，2： | 10 |
| 6 | Expert consensus on the glycemic management of critically ill patients显示文摘Introduction The incidence of hyperglycemia is 40-60%in critically ill patients and is up to 60-80%in those who have undergone car-diac surgery.[1]The results of an epidemiological study in the United States showed that 28.6%of diabetic patients and 9.3%of non-diabetic patients had elevated mean daily glucose on the day of ICU admission.[2]In critically ill patients,elevated blood glucose is primarily the result of stress,and stress-induced hy-perglycemia is an independent risk factor associated with prog-nosis,regardless of a previous diagnosis of diabetes.Nutritional therapy has become an integral treatment option for patients in the ICU,[3,4]though nearly 30%of patients with enteral nu-trition and 44-50%with parenteral nutrition(PN)experience elevated glucose.[5,6]Intensive insulin therapy(IIT)is an impor-tant treatment for controlling hyperglycemia in critically ill pa-tients,but it also carries a corresponding risk of hypoglycemia. | Zhixiong Wu Jiao Liu Dong Zhang Kai Kang Xiangrong Zuo Qianghong Xu Aijun Pan Wei Fang Fen Liu You Shang Haiyan Yin Juntao Hu Jinglun Liu Jiangquan Fu Wei Zhang Yuan Zong Min Shao Feng Zhao Mei Meng Yanfei Mao Yingchuan Li Dechang Chen | 2022 | Journal of Intensive Medicine2022，2，3： | 9 |
| 7 | Density-based trajectory outlier detection algorithm显示文摘With the development of global position system(GPS),wireless technology and location aware services,it is possible to collect a large quantity of trajectory data.In the field of data mining for moving objects,the problem of anomaly detection is a hot topic.Based on the development of anomalous trajectory detection of moving objects,this paper introduces the classical trajectory outlier detection(TRAOD) algorithm,and then proposes a density-based trajectory outlier detection(DBTOD) algorithm,which compensates the disadvantages of the TRAOD algorithm that it is unable to detect anomalous defects when the trajectory is local and dense.The results of employing the proposed algorithm to Elk1993 and Deer1995 datasets are also presented,which show the effectiveness of the algorithm. | Zhipeng Liu Dechang Pi Jinfeng Jiang | 2013 | Journal of Systems Engineering and Electronics2013，24，2： | 9 |
| 8 | Ensemble kernel method:SVM classification based on game theory显示文摘With the development of the support vector machine(SVM),the kernel function has become one of the cores of the research on SVM.To a large extent,the kernel function determines the generalization ability of the classifier,but there is still no general theory to guide the choice and structure of the kernel function.An ensemble kernel function model based on the game theory is proposed,which is used for the SVM classification algorithm.The model can effectively integrate the advantages of the local kernel and the global kernel to get a better classification result,and can provide a feasible way for structuring the kernel function.By making experiments on some standard datasets,it is verified that the new method can significantly improve the accuracy of classification. | Yufei Liu Dechang Pi Qiyou Cheng | 2016 | Journal of Systems Engineering and Electronics2016，27，1： | 6 |
| 9 | The effect of applied voltages on the structure,apatite-inducing ability and antibacterial ability of micro arc oxidation coating formed on titanium surface显示文摘The micro arc oxidation(MAO)coatings with different concentrations of Ca,P and Zn elements are successfully formed on the titanium substrate at the different applied voltages.After MAO treatment,the MAO coating exhibits the porous surface structure and composed of anatase and rutile TiO2 phases.Meanwhile,the average size and density of micro-pores on the MAO coatings have been modified via the adjusting the applied voltages.In addition,the contents of the incorporated elements such as Zn,Ca and P elements in the MAO coatings have been optimized.The bonding strength test results reveal that the MAO coating shows higher bonding strength,which is up to 45±5 MPa.Compared to the pure Ti plate,the MAO coating formed at 350 and 400 V show good apatite-inducing ability.Meanwhile,the MAO coating containing Zn,Ca and P elements have better antibacterial ability for E.coli and S.aureus.Thus,the incorporation of Zn,Ca and P elements was an effective method to improve the antibacterial ability.Moreover,the concentrations of Zn,Ca and P elements could be adjusted with the changing of the applied voltages.As a result,the enhancement of the antibacterial ability on the MAO coating surfaces was depended on the comprehensive effect of the incorporated elements and the surface property of MAO coatings. | Qing Du Daqing Wei Yaming Wang Su Cheng Shang Liu Yu Zhou Dechang Jia | 2018 | Bioactive Materials2018，3，4： | 6 |
| 10 | Thermal Growth and Nanomagnetism of the Quasi-one Dimensional Iron Oxide显示文摘Quasi-one dimensional iron oxide nanowires with flat needle shape were synthesized on the iron powders by a rather simple catalyst-free thermal oxidation process in ambient atmosphere. The characterization by field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Raman and high-resolution transmission electron microscopy (HRTEM) revealed that these nanostructures are single crystalline α-Fe2O3. The various dimensions with 40-170 nm in width and 1-8 μm in length were obtained by tuning the growth temperature from 280 to 480℃. A surface diffusion mechanism was proposed to account for the growth of quasi-one dimensional nanostructure. The typical α-Fe2O3 nanowires synthesized at 430℃ had a reduced Morin temperature TM of 131 K in comparison with their bulk counterpart. The coercivitis Hc of these nanowires are 321 and 65 Oe at 5 and 300 K, respectively. The temperature of synthesis also has important effects on the magnetic properties of these nanowires. | Minglong Zhong Zhongwu Liu Xichun Zhong Hongya Yu Dechang Zeng | 2011 | Journal of Materials Science & Technology2011，27，11： | 5 |
| 11 | Security Analysis of a Park-level Agricultural Energy Network Considering Agrometeorology and Energy Meteorology显示文摘China’s industrial manufacturing industry is well developed,but its agriculture is primitive.The only way to solve this problem is to improve through modern agriculture.The cross integration of new energy development and modern agriculture is becoming more and more critical.However,the research on the interaction between the meteorological disaster of facility agriculture and the power supply security of the integrated energy supply system has not formed a systematic theoretical system,which challenges the collaborative security of the facility agriculture and energy system.In this paper,energy meteorology and agrometeorology are considered and modeled,and the static security of a park-level agricultural energy network is simulated and analyzed under different weather conditions. | Xueqian Fu Dechang Yang Qinglai Guo Hongbin Sun | 2020 | CSEE Journal of Power and Energy Systems2020，6，3： | 5 |
| 12 | Direct ink writing of continuous SiO2 fiber reinforced wave-transparent ceramics显示文摘This article reports the first example of 3D printed continuous SiO2 fiber reinforced wave-transparent ceramic composites via an adaptation of direct ink writing technology to improve the mechanical and dielectric properties of ceramics.The ceramic inks showed good printability by adding nano-SiO2 powder.The effective continuous fiber-reinforced printing progress was achieved through the design and optimization of the coaxial needle structures by finite element simulation.After printing,the continuous fibers were evenly and continuously distributed in the matrix ceramics and the high molding precision for fiber reinforced composite was kept.It is demonstrated that 10 vol%continuous SiO2 fiber improved the bending strength of ceramics by about 27%better than that of the ceramics without fiber and the dielectric performance has also been greatly improved.The novel method unravels the potential of direct ink writing of continuous fiber reinforced wave-transparent ceramics with complex structures and improved properties. | Zhe Zhao Guoxiang Zhou Zhihua Yang Xianqi Cao Dechang Jia Yu Zhou | 2020 | Journal of Advanced Ceramics2020，9，4： | 4 |
| 13 | Fault Diagnosis of Power Transformers Using Graph Convolutional Network显示文摘Existing methods for transformer fault diagnosis either train a classifier to fit the relationship between dissolved gas and fault type or find some similar cases with unknown samples by calculating the similarity metrics.Their accuracy is limited,since they are hard to learn from other algorithms to improve their own performance.To improve the accuracy of transformer fault diagnosis,a novel method for transformer fault diagnosis based on graph convolutional network(GCN)is proposed.The proposed method has the advantages of two kinds of existing methods.Specifically,the adjacency matrix of GCN is utilized to fully represent the similarity metrics between unknown samples and labeled samples.Furthermore,the graph convolutional layers with strong feature extraction ability are used as a classifier to find the complex nonlinear relationship between dissolved gas and fault type.The back propagation algorithm is used to complete the training process of GCN.The simulation results show that the performance of GCN is better than that of the existing methods such as convolutional neural network,multi-layer perceptron,support vector machine,extreme gradient boosting tree,k-nearest neighbors and Siamese network in different input features and data volumes,which can effectively meet the needs of diagnostic accuracy. | Wenlong Liao Dechang Yang Yusen Wang Xiang Ren | 2021 | CSEE Journal of Power and Energy Systems2021，7，2： | 4 |
| 14 | Comparison of Charlson's weighted index of comorbidities with the chronic health score for the prediction of mortality in septic patients显示文摘 | Cui Yunliang Wang Tao Bao Jun Tian Zhaotao Lin Zhaofen Chen Dechang | 2014 | Chinese Medical Journal2014，，14： | 4 |
| 15 | Microstructure and mechanical properties of SiC_(f)/SiBCN ceramic matrix composites显示文摘SiC fiber reinforced SiBCN ceramic matrix composites(CMCs)have been prepared by mechanical alloying and consolidated by hot pressing.During the sintering process,amorphous SiC fibers crystallized seriously and transformed into-SiC.Meanwhile,the interfacial carbothermal reactions caused the strong bonding between the matrix and fibers.As a result,SiCf/SiBCN fractured in a typical catastrophic manner.Room-temperature mechanical properties reached the maximums for the CMC samples sintered at 1900℃/60 MPa/30 min.The density,flexural strength,Young’s modulus and fracture toughness are 2.56±0.02 g/cm^(3),284.3±17.9 MPa,183.5±11.1 GPa and 2.78±0.14 MPa·m^(1/2),respectively. | Jiaying WANG Zhihua YANG Xiaoming DUAN Dechang JIA Yu ZHOU | 2015 | Journal of Advanced Ceramics2015，4，1： | 3 |
| 16 | Recent advances in preparation,properties and device applications of twodimensional h-BN and its vertical heterostructures显示文摘Two-dimensional(2D) layered materials,such as graphene,hexagonal boron nitride(h-BN),molybdenum disulfide(Mo S_2/,have attracted tremendous interest due to their atom-thickness structures and excellent physical properties.h-BN has predominant advantages as the dielectric substrate in FET devices due to its outstanding properties such as chemically inert surface,being free of dangling bonds and surface charge traps,especially the large-band-gap insulativity.h-BN involved vertical heterostructures have been widely exploited during the past few years.Such heterostructures adopting h-BN as dielectric layers exhibit enhanced electronic performance,and provide further possibilities for device engineering.Besides,a series of intriguing physical phenomena are observed in certain vertical heterostructures,such as superlattice potential induced replication of Dirac points,band gap tuning,Hofstadter butterfly states,gate-dependent pseudospin mixing.Herein we focus on the rapid developments of h-BN synthesis and fabrication of vertical heterostructures devices based on h-BN,and review the novel properties as well as the potential applications of the heterostructures composed of h-BN. | Huihui Yang Feng Gao Mingjin Dai Dechang Jia Yu Zhou Pingan Hu | 2017 | Journal of Semiconductors2017，38，3： | 3 |
| 17 | Enhanced thermal shock and oxidation resistance of Si_2BC_3N ceramics through MWCNTs incorporation显示文摘Multi-walled carbon nanotubes(MWCNTs)reinforced Si_2BC_3N ceramics were prepared through mechanical alloying(MA)and following spark plasma sintering(SPS).The thermal shock resistance of Si_2BC_3N ceramics was evaluated comparatively through ice water quenching test and theoretical prediction.Furthermore,the oxidation resistance of MWCNTs incorporated Si_2BC_3N ceramics was evaluated under high temperature.The results show that the calculated parameters such as the critical thermal shock temperature(R)and the thermal stresses resistance(R_(st)),as well as the toughness(R'')are improved with addition of 1 vol%MWCNTs.In addition,the crack propagation resistance of 1 vol%MWCNTs incorporated Si_2BC_3N ceramics is obviously improved through generating more tortuous crack propagation paths attributing to the'crack bridging','pull-out',and'crack deflection'mechanisms of MWCNTs.Therefore,the residual strengths of 1 vol%MWCNTs containing specimens remained the highest after the thermal shock tests.Besides,the present work also reveals that the oxidation resistance is more sensitive to relative density than MWCNTs addition. | Ning LIAO Dechang JIA Zhihua YANG Yu ZHOU Yawei LI | 2018 | Journal of Advanced Ceramics2018，7，3： | 3 |
| 18 | Lipopolysaccharide induced intestinal epithelial injury:a novel organoids-based model for sepsis in vitro显示文摘Background: Advances in organoid culture technology have provided a greater understanding of disease pathogenesis, which has been rarely studied in sepsis before. We aim to establish a suitable organoids-based intestinal injury model for sepsis.Methods: Stable passaged organoids were constructed and pre-treated with lipopolysaccharide (LPS) to mimic sepsis-induced intestinal injury. The LPS-induced sepsis model was used as a reference. We used quantitative real-time polymerase chain reaction to evaluate the RNA levels of inflammatory factors and antimicrobial peptides. Enzyme-linked immunosorbent assay was used to evaluate the protein levels, hematoxylin and eosin staining was used to evaluate the pathology of the small intestine of mice, and immunohistochemistry and immunofluorescence were used to evaluate the intestinal epithelial barrier function. Perkin Elmer OperettaTM was used to obtain high-resolution images of three-dimensional organoids.Results: An LPS concentration >150 μg/mL after 24 h was identified to cause organoid growth restriction. The fluorescence intensity of zonula occludens-1 and occludins at LPS concentrations >100 μg/mL decreased significantly after 24 h. After LPS stimulation for 8 h, the RNA expression levels of interleukin (IL)-1α, tumor necrosis factor alpha, granulocyte-macrophage colony-stimulating factor, IL-6, and regenerating islet-derived protein 3 alpha, beta, and gamma increased. These results resembled those of intestinal epithelial layer alterations in a mouse sepsis model. For IL-10, the RNA expression level increased only when the LPS level >200 μg/mL for 24 h.Conclusions: This study provides the primary intestinalin vitro model to study the effects of LPS-induced intestinal injury resembling sepsis. This model provides a platform for immune associated mechanism exploration and effective drug screening. | Sisi Huang Sheng Zhang Limin Chen Xiaojun Pan Zhenliang Wen Yizhu Chen Lidi Zhang Jiao Liu Dechang Chen | 2022 | Chinese Medical Journal2022，135，18： | 3 |
| 19 | Magnetic properties and magnetocaloric effects in amorphous and crystalline Gd_(55)Co_(35)Ni_(10) ribbons显示文摘The magnetic properties and magnetocaloric effects of amorphous and crystalline Gd55Co35Ni10 ribbons are investigated.A main phase with a Ho 12 Co 7-type monoclinic structure(space group P21/c) and a minor phase with a Ho4Co3-type hexagonal structure(space group P63/m) are obtained for crystalline ribbon after annealing.The amorphous ribbons order ferromagnetically and undergo a second-order transition at 192 K.For crystalline Gd55Co35Ni10 ribbons,two magnetic phase transitions occur at 158 and 214 K,respectively.The peak value of-△SM under a field change of 0-5 T is 6.5 J/kg K at 192 K for amorphous Gd55Co35Ni10 ribbons.A relatively large magnetic entropy change(~5.0 J/kg K) under a field change of 0-5 T for the crystalline Gd55Co35Ni10 ribbons is obtained in the temperature interval range of 154-214 K.The large platform of magnetic entropy change and the negligible thermal/magnetic hysteresis loss mean the crystalline Gd55Co35Ni10 compound can satisfy the requirement of the Ericsson-type refrigerator working in the temperature range from 154K to 214K. | ZHONG XiChun TANG PengFei GAO BeiBei MIN JiXiong LIU ZhongWu ZHENG ZhiGang ZENG DeChang YU HongYa QIU WanQi | 2013 | Science China(Physics,Mechanics & Astronomy)2013，56，6： | 3 |
| 20 | Improved insensitive to input parameters trajectory clustering algorithm显示文摘The existing trajectory clustering(TRACLUS) is sensitive to the input parameters ε and MinLns. The parameter value is changed a little, but cluster results are entirely different. Aiming at this vulnerability, a shielding parameters sensitivity trajectory cluster(SPSTC) algorithm is proposed which is insensitive to the input parameters. Firstly, some definitions about the core distance and reachable distance of line segment are presented, and then the algorithm generates cluster sorting according to the core distance and reachable distance. Secondly, the reachable plots of line segment sets are constructed according to the cluster sorting and reachable distance. Thirdly, a parameterized sequence is extracted according to the reachable plot, and then the final trajectory cluster based on the parameterized sequence is acquired. The parameterized sequence represents the inner cluster structure of trajectory data. Experiments on real data sets and test data sets show that the SPSTC algorithm effectively reduces the sensitivity to the input parameters, meanwhile it can obtain the better quality of the trajectory cluster. | Jiashun Chen Dechang Pi | 2013 | Journal of Systems Engineering and Electronics2013，24，5： | 3 |
您所在的机构暂未开通此部分的功能，请联系管理员