|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | Lithium–matrix composite anode protected by a solid electrolyte layer for stable lithium metal batteries显示文摘Lithium (Li) metal with an ultrahigh specific theoretical capacity and the lowest reduction potential is strongly considered as a promising anode for high-energy-density batteries. However, uncontrolled lithium dendrites and infinite volume change during repeated plating/stripping cycles hinder its practical applications immensely. Herein, a house-like Li anode (housed Li) was designed to circumvent the above issues. The house matrix was composed of carbon fiber matrix and affords a stable structure to relieve the volume change. An artificial solid electrolyte layer was formed on composite Li metal, just like the roof of a house, which facilitates uniform Li ions diffusion and serves as a physical barrier against electrolyte corrosion. With the combination of solid electrolyte layer and matrix in the composite Li metal anode, both dendrite growth and volume expansion are remarkably inhibited. The housed Li|LiFePO4 batteries exhibited over 95% capacity retention after 500 cycles at 1.0 C in coin cell and 85% capacity retention after 80 cycles at 0.5 C in pouch cell. The rationally combination of solid electrolyte layer protection and housed framework in one Li metal anode sheds fresh insights on the design principle of a safe and long-lifespan Li metal anode for Li metal batteries. | Xin Shen Xinbing Cheng Peng Shi Jiaqi Huang Xueqiang Zhang Chong Yan Tao Li Qiang Zhang | 2019 | Journal of Energy Chemistry2019，28，10： | 23 |
| 2 | Role of electrodes in ambient electrolytic decomposition of hydroxylammonium nitrate (HAN) solutions显示文摘Decomposition of hydroxylammonium nitrate (HAN) solution with electrolytic decomposition method has attracted much attention in recent years due to its efficiencies and practicability.However,the phenomenon has not been well-studied till now. By utilizing mathematical model currently available,the effect of water content and power used for decomposition was studied. Experiment data shows that sacrificial material such as copper or aluminum outperforms inert electrodes in the decomposition of HAN solution. In the case of using copper wire to electrolyse HAN solutions, approximately 10 seconds is required to reach 100℃ regardless of concentration of HAN. In tem of power consumption,100W-300W was found to be the range in which decomposition could be triggered effectively using copper wire as electrodes. | Kai SengKoh Jitkai Chin Tengku F.Wahida Ku Chik | 2013 | Propulsion and Power Research2013，2，3： | 12 |
| 3 | Enhancing Capacitance Performance of Ti3C2Tx MXene as Electrode Materials of Supercapacitor: From Controlled Preparation to Composite Structure Construction显示文摘Ti3C2Tx,a novel two-dimensional layer material,is widely used as electrode materials of supercapacitor due to its good metal conductivity,redox reaction active surface,and so on.However,there are many challenges to be addressed which impede Ti3C2Tx obtaining the ideal specific capacitance,such as restacking,re-crushing,and oxidation of titanium.Recently,many advances have been proposed to enhance capacitance performance of Ti3C2Tx.In this review,recent strategies for improving specific capacitance are summarized and compared,for example,film formation,surface modification,and composite method.Furthermore,in order to comprehend the mechanism of those efforts,this review analyzes the energy storage performance in different electrolytes and influencing factors.This review is expected to predict redouble research direction of Ti3C2Tx materials in supercapacitors. | Xiaobei Zang Jiali Wang Yijiang Qin Teng Wang Chengpeng He Qingguo Shao Hongwei Zhu Ning Cao | 2020 | Nano-Micro Letters2020，12，6： | 10 |
| 4 | Energy harvesting textiles for a rainy day:woven piezoelectrics based on melt-spun PVDF microfibres with a conducting core显示文摘Recent advances in ubiquitous low-power electronics call for the development of light-weight and flexible energy sources.The textile format is highly attractive for unobtrusive harvesting of energy from e.g.,biomechanical movements.Here,we report the manufacture and characterisation of fully textile piezoelectric generators that can operate under wet conditions.We use a weaving loom to realise textile bands with yarns of melt-spun piezoelectric microfibres,that consist of a conducting core surrounded byβ-phase poly(vinylidene fluoride)(PVDF),in the warp direction.The core-sheath constitution of the piezoelectric microfibres results in a—for electronic textiles—unique architecture.The inner electrode is fully shielded from the outer electrode(made up of conducting yarns that are integrated in the weft direction)which prevents shorting under wet conditions.As a result,and in contrast to other energy harvesting textiles,we are able to demonstrate piezoelectric fabrics that do not only continue to function when in contact with water,but show enhanced performance.The piezoelectric bands generate an output of several volts at strains below one percent.We show that integration into the shoulder strap of a laptop case permits the continuous generation of four microwatts of power during a brisk walk.This promising performance,combined with the fact that our solution uses scalable materials and well-established industrial manufacturing methods,opens up the possibility to develop wearable electronics that are powered by piezoelectric textiles. | Anja Lund Karin Rundqvist Erik Nilsson Liyang Yu Bengt Hagstrom Christian Muller | 2018 | npj Flexible Electronics2018，2，1： | 10 |
| 5 | Li-Si合金中间相作为锂离子电池负极材料的研究(英文)显示文摘采用基于密度泛函理论的第一性原理平面波赝势方法计算了Li-Si各种合金相的物理性质和电化学性能。结果表明:除了在反应过程中生成传统的固态电解质SEI膜之外,形成的Li12Si7合金相也是部分导致首次不可逆容量损失的重要原因。另外,采用射频磁控溅射制备了纯Si薄膜电极,并运用XRD、循环伏安CV、恒流充放电CC表征和测试了材料的结构和电化学性能,结果表明首次不可逆容量损失非常大,无定型结构能有效抑制体积膨胀和改善循环性能。 | 侯贤华 胡社军 汝强 张志文 | 2010 | 稀有金属材料与工程2010，39，12： | 9 |
| 6 | Breaking 12% efficiency in flexible organic solar cells by using a composite electrode显示文摘The performance of flexible organic solar cells(OSCs)significantly relies on the quality of transparent flexible electrode.Here,we used silver nanowires(AgNWs)with various weight ratios to dope high-conductive poly(3,4-ethylenedioxythiophene):polystyrene sulfonate(PH1000)to optimize the optical and electronic properties of PH1000 film.A high-quality flexible composite electrode PET/Ag-mesh/PH1000:AgNWs-20 with smooth surface,a low sheet resistance of 6Ω/sq and a high transmittance of 86%at 550-nm wavelength was obtained by doping 20 wt%AgNWs to PH1000(PH1000:AgNWs-20).The flexible OSCs based on the PET/Ag-mesh/PH1000:AgNWs-20 electrode delivered a power conversion efficiency(PCE)of12.07%with an open circuit voltage(Voc)of 0.826 V,a short-circuit current density(Jsc)of 20.90 m A/cm2and a fill factor(FF)of69.87%,which is the highest reported PCE for the flexible indium-tin oxide(ITO)-free OSCs.This work demonstrated that the flexible composite electrodes of PET/Ag-mesh/PH1000:AgNWs are promising alternatives for the conventional PET/ITO electrode,and open a new avenue for developing high-performance flexible transparent electrode for optoelectronic devices. | Guang Zeng Jingwen Zhang Xiaobin Chen Hongwei Gu Yaowen Li Yongfang Li | 2019 | Science China Chemistry2019，62，7： | 9 |
| 7 | Optimization of Metal Coverage on the Emitter in n-Type Interdigitated Back Contact Solar Cells Using a PC2D Simulation显示文摘In interdigitated back contact(IBC)solar cells,the metal-electrode coverage on a p-type emitter is optimized by a PC2D simulation.The result shows that the variation of the metal coverage ratio(MCR)will affect both the surface passivation and the electrode-contact properties for the p-type emitter in IBC solar cells.We find that when R_(c) ranges from 0.08 to 0.16Ω·cm^(2),the MCR is optimized with a value of 25%and 33%,resulting in a highest energy-conversion efficiency.The dependences of both Voc and fill factor on MCR are simulated in order to explore the mechanism of the IBC solar cells. | 张巍 陈晨 贾锐 Janssen G.J.M. 张代生 邢钊 Bronsveld P.C.P. Weeber A.W. 金智 刘新宇 | 2013 | Chinese Physics Letters2013，30，7： | 9 |
| 8 | The electrochemical hydrogen storage performances of Si-added La–Mg–Ni–Co-based A_2B_7-type electrode alloys显示文摘In order to improve the electrochemical cycle stability of the RE–Mg–Ni-based A2B7-type electrode alloys, a small amount of Si has been added into the alloys.The casting and annealing technologies were adopted to fabricate the La0.8Mg0.2Ni3.3Co0.2Six(x = 0–0.2) electrode alloys. The impacts of the addition of Si and annealing treatment on the structures and electrochemical performances of the alloys were investigated systematically. The results obtained by XRD and SEM show that all the as-cast and annealed alloys are of a multiphase structure, involving two main phases(La, Mg)2Ni7and La Ni5 as well as a residual phase La Ni3. Both adding Si and the annealing treatment lead to an evident change in the phase abundance and cell parameters of(La, Mg)2Ni7and La Ni5 major phases of the alloy without altering its main phase component. Moreover, the annealing treatment has the composition of the alloy distributed more homogeneously overall and simultaneously causes the grain of the alloy to be coarsened obviously. The electrochemical measurements indicate that adding Si and the annealing treatment give a significant rise to the influence on the electrochemical performances of the alloys. In brief, the cycle stability of the as-cast and annealed alloys evidently increases with the rising of Si content, while their discharge capacities obviously decrease under the same circumstances. Furthermore, the electrochemical kineticproperties of the electrode alloys, including the high rate discharge ability, the limiting current density(IL), hydrogen diffusion coefficient(D), and the charge-transfer resistance, first augment and then decline with the rising of Si content. Similarly, it is found that the above-mentioned electrochemical properties first mount up and then go down with the rising annealing temperature. | Yang-Huan Zhang Li-Cui Chen Tai Yang Chao Xu Hui-Ping Ren Dong-Liang Zhao | 2015 | Rare Metals2015，34，8： | 9 |
| 9 | Mesoporous Graphene Hosts for Dendrite-Free Lithium Metal Anode in Working Rechargeable Batteries显示文摘Lithium(Li) metal anode has received extensive attentions due to its ultrahigh theoretical capacity and the most negative electrode potential. However, dendrite growth severely impedes the practical applications of the Li metal anode in rechargeable batteries. In this contribution, a mesoporous graphene with a high specific surface area was synthesized to host the Li metal anode. The mesoporous graphene host(MGH) has a high specific surface area(2090 m^2/g), which affords free space and an interconnected conductive pathway for Li plating and stripping, thus alleviating the volume variation and reducing the generation of dead Li during repeated cycles. More importantly, the high specific surface area of MGH efficiently reduces the local current density of the electrode, which favors a uniform Li nucleation and plating behavior, rendering a dendritefree deposition morphology at a low overpotential. These factors synergistically boost the Li utilization(90.1% vs. 70.1% for Cu foil) and life span(150 cycles vs. 100 cycles for Cu foil) with a low polarization of MGH electrode at an ultrahigh current of 15.0 mA/cm^2. The as-prepared MGH can provide fresh insights into the electrode design of the Li metal anode operating at high rates. | He Liu Xinbing Cheng Rui Zhang Peng Shi Xin Shen Xiaoru Chen Tao Li Jiaqi Huang Qiang Zhang | 2020 | Transactions of Tianjin University2020，26，2： | 9 |
| 10 | Effect of corrosive media on galvanic corrosion of complicated tri-metallic couples of 2024 Al alloy/Q235 mild steel/304 stainless steel显示文摘Galvanic corrosion of tri-metallic couples is more complicated than that of bi-metallic couples. In this study, the effect of the pH of corrosive media on the galvanic corrosion of 2024 A1 alloy/Q235 mild steel/304 stainless steel tri-metallic couples was investigated using potentiodynamic polarization, scanning electron microscopy, scanning vibrating electrode technique and a multi-channel galvanic corrosion meter. The results show that 2024 always acts as the only anode in 3.5 wt% NaCl at pH 5.56,9.72 and 12.0, while both Q235 and 2024 act as anodes at pH 2.39 in the initial stage and then the role of Q235 changes at longer coupling time, which can be attributed to the effect of pH on the surface film of 2024. It is also found that the galvanic current density of a tri-metallic couple is the superposition of two bi-metallic couples when cathodic reactions are controlled by the diffusion of oxygen, otherwise it is smaller than that of the sum of two bi-metallic couples. The localized corrosion instead of uniform corrosion of anodic metal is accelerated by galvanic corrosion. | Linjun Shi Xiuying Yang Yingwei Song Dan Liua Kaihui Dong Dayong Shan En-Hou Han | 2019 | Journal of Materials Science & Technology2019，35，9： | 8 |
| 11 | Nanostructured ultrathin catalyst layer with ordered platinum nanotube arrays for polymer electrolyte membrane fuel cells显示文摘Fabrication of novel electrode architectures with nanostructured ultrathin catalyst layers is an effective strategy to improve catalyst utilization and enhance mass transport for polymer electrolyte membrane fuel cells (PEMFCs).Herein,we report the design and construction of a nanostructured ultrathin catalyst layer with ordered Pt nanotube arrays,which were obtained by a hard-template strategy based on ZnO,via hydrothermal synthesis and magnetron sputtering for PEMFC application.Because of the crystallographically preferential growth of Pt (111) facets,which was attributed to the structural effects of ZnO nanoarrays on the Pt nanotubes,the catalyst layers exhibit obviously higher electrochemical activity with remarkable enhancement of specific activity and mass transport compared with the state-of-the-art randomly distributed Pt/C catalyst layer.The PEMFC fabricated with the as-prepared catalyst layer composed of optimized Pt nanotubes with an average diameter of 90(±10) nm shows excellent performance with a peak power density of 6.0W/mgPt at 1 A/cm^2,which is 11.6%greater than that of the conventional Pt/C electrode. | Ruoyi Deng Zhangxun Xia Ruili Sun Suli Wang Gongquan Sun | 2020 | Journal of Energy Chemistry2020，29，4： | 8 |
| 12 | 冷冻-解冻循环及气体吹扫对质子交换膜燃料电池的影响显示文摘At subzero temperature, the startup capability and performance of polymer electrolyte membrane fuel cell (PEMFC) deteriorates markedly. The object of this work is to study the degradation mechanism of key components of PEMFC-membrane-electrode assembly (MEA) and seek feasible measures to avoid degradation. The effect of freeze/thaw cycles on the structure of MEA is investigated based on porosity and SEM measurement. The performance of a single cell was also tested before and after repetitious freeze/thaw cycles. The experimental results indicated that the performance of a PEMFC decreased along with the total operating time as well as the pore size distribution shifting and micro configuration changing. However, when the redundant water had been removed by gas purging, the performance of the PEMFC stack was almost resumed when it experienced again the same subzero temperature test. These results show that it is necessary to remove the water in PEMFCs to maintain stable performance under subzero temperature and gas purging is proved to be the effective operation. | 张生生 俞红梅 朱红 侯俊波 衣宝廉 明平文 | 2006 | Chinese Journal of Chemical Engineering2006，14，6： | 7 |
| 13 | Emerging CoMn-LDH@MnO2 electrode materials assembled using nanosheets for flexible and foldable energy storage devices显示文摘CoMn layered double hydroxides(CoMn-LDH)are promising electrode materials for supercapacitors because of their excellent cyclic stability.However,they possess relatively low capacitances.In this work,hybrid CoMn-LDH@MnO2 products grown on Ni foams were obtained through a facile hydrothermal method.The as-synthesized samples employed as electrodes deliver a specific capacitance of 2325.01 F g^-1 at 1 A g^-1.An assembled asymmetric supercapacitor using these products as positive electrodes shows a maximum energy density of 59.73 W h kg^-1 at 1000.09 W kg^-1.The prominent electrochemical performance of the as-prepared electrodes could be attributes to hierarchical structures.These findings suggest that hybrid structures might be potential alternatives for future flexible energy storage devices. | Yue Zhao Jiafeng He Meizhen Dai Depeng Zhao Xiang Wu Baodan Liu | 2020 | Journal of Energy Chemistry2020，29，6： | 7 |
| 14 | Addition of IrO_2 to RuO_2+TiO_2 coated anodes and its effect on electrochemical performance of anodes in acid media显示文摘Ternary mixed metal oxide coatings with the nominal composition IrxRu(0.6-x)Ti0.4O2(x=0, 0.1, 0.2, 0.3) on the titanium substrate were prepared by thermal decomposition of a chloride precursor mixture. Surface morphology and microstructure of the coatings were investigated by Scanning electron microscopy(SEM), Field emission scanning electron microscopy(FE-SEM) and X-ray diffraction(XRD) analysis. Systematic study of electrochemical properties of these coatings was performed by cyclic voltammetry(CV) and polarization measurements. The corrosion behavior of the coatings was evaluated under accelerated conditions(j=2 A cm-2) in acidic electrolyte. The role of iridium oxide admixture in the change of electrocatalytic activity and stability of Ru0.6Ti0.4O2coating was discussed. Small addition of IrO2can improve the stability of the RuO2+TiO2mixed oxide, while the electrocatalytic activity for oxygen evolution reaction(OER) is decreased. The shift of redox potentials for Ru0.6Ti0.4O2electrode that is slightly activated with IrO2and improvement in the stability can be attributed to the synergetic effect of mixed oxide formation. | Farhad Moradi Changiz Dehghanian | 2014 | Progress in Natural Science:Materials International2014，24，2： | 7 |
| 15 | Surface charge accumulation behavior and its influence on surface flashover performance of Al2O3-filled epoxy resin insulators under DC voltages显示文摘Surface charge accumulation on insulator surface can have great influence on surface flashover performance.An experimental system is established to investigate surface charge accumulation and decay characteristics of Al2O3-filled epoxy resin insulators in 0.1 MPa SF6 under DC voltages.Surface potential is recorded by a Kelvin vibrating probe connected to an electrostatic voltmeter.By pre-depositing charges on insulator surface,the influence of surface charges on surface flashover performance is studied.The results reveal that surface charge distribution appearance is the combined effect of electrode injection,back discharge and gas ionization.Surface charge distribution has obvious polarity effect.It is concentrated near the HV electrode under positive voltages and dispersed under negative voltages.The difference in positive and negative surface flashover voltage is attributed to the difference in surface charge distribution under DC voltages of different polarities.Surface charge decay contains two stages,which satisfies the law of double exponential function.At first stage,surface charge decays fast,which corresponds to charges escaping from shallower traps.While it decays slowly at the second stage,which corresponds to charge escaping from deeper traps.Surface charge decay process is dominated by surface conductivity mechanism.The pre-deposited charges on insulation surface have great influence on surface flashover performance.The deposited positive charges can increase positive flashover voltage but decrease negative flashover voltage. | 刘彦琴 吴广宁 高国强 薛建议 康永强 石超群 | 2019 | Plasma Science and Technology2019，21，5： | 7 |
| 16 | Analytical modeling and simulation of porous electrodes: Li-ion distribution and diffusion-induced stress显示文摘A new model of porous electrodes based on the Gibbs free energy is developed, in which lithium-ion(Liion) diffusion, diffusion-induced stress(DIS), Butler–Volmer(BV) reaction kinetics, and size polydispersity of electrode particles are considered. The influence of BV reaction kinetics and concentration-dependent exchange current density(ECD) on concentration profile and DIS evolution are numerically investigated. BV reaction kinetics leads to a decrease in Li-ion concentration and DIS. In addition, concentrationdependent ECD results in a decrease in Li-ion concentration and an increase in DIS. Size polydispersity of electrode particles significantly affects the concentration profile and DIS.Optimal macroscopic state of charge(SOC) should consider the influence of the microscopic SOC values and mass fractions of differently sized particles. | Liang Ji Zhansheng Guo | 2018 | Acta Mechanica Sinica2018，34，1： | 6 |
| 17 | Single phase A2B7-type La-Mg-Ni alloy with improved electrochemical properties prepared by melt-spinning and annealing显示文摘La-Mg-Ni alloys were prepared by melt-spinning with different cooling rates and followed by annealing.Elevation of the cooling rate leads to refinement of the grains size and increasing of the abundance of LaNis.Annealing is favorable to formation of the A2 B7-type phase and promotes the discharge capacity,cycling stability and high rate discharge ability of the as-spun alloys.Phase constitution of the annealed alloys is found to be closely related to the microstructure of the as-spun alloys.A single phase A2 B7-type microstructure is obtained in the annealed alloy which is attributed to the lower abundance of the LaNis of the original alloy spun with lower cooling rate.Formation of the single phase A2 B7-type microstructure is also ascribed to the isolated and homogeneous distribution of the morphology of the as-spun alloy.The single phase alloy presents higher discharge capacity and better cycling stability compared with other annealed alloys. | Yiming Li Zhuocheng Liu Guofang Zhang Yanghuan Zhang Huiping Ren | 2019 | Journal of Rare Earths2019，37，12： | 6 |
| 18 | Water Splitting:From Electrode to Green Energy System显示文摘Hydrogen(H2)production is a latent feasibility of renewable clean energy.The industrial H2 production is obtained from reforming of natural gas,which consumes a large amount of nonrenewable energy and simultaneously produces greenhouse gas carbon dioxide.Electrochemical water splitting is a promising approach for the H2 production,which is sustainable and pollution-free.Therefore,developing efficient and economic technologies for electrochemical water splitting has been an important goal for researchers around the world.The utilization of green energy systems to reduce overall energy consumption is more important for H2 production.Harvesting and converting energy from the environment by different green energy systems for water splitting can efficiently decrease the external power consumption.A variety of green energy systems for efficient producing H2,such as two-electrode electrolysis of water,water splitting driven by photoelectrode devices,solar cells,thermoelectric devices,triboelectric nanogenerator,pyroelectric device or electrochemical water-gas shift device,have been developed recently.In this review,some notable progress made in the different green energy cells for water splitting is discussed in detail.We hoped this review can guide people to pay more attention to the development of green energy system to generate pollution-free H2 energy,which will realize the whole process of H2 production with low cost,pollution-free and energy sustainability conversion. | Xiao Li Lili Zhao Jiayuan Yu Xiaoyan Liu Xiaoli Zhang Hong Liu Weijia Zhou | 2020 | Nano-Micro Letters2020，12，10： | 6 |
| 19 | Electrochemical reduction of graphene oxide films:Preparation,characterization and their electrochemical properties显示文摘Graphene oxide (GO) film was electrochemically reduced by a cyclic voltammetry technique in 6 mol L-1 KOH aqueous solution.Electrochemically reduced graphene oxide (ER-GO) film was characterized by X-ray diffraction,X-ray photoelectron spectroscopy,atomic force microscopy,and Raman spectroscopy.The oxygen content (with the O/C atomic ratio of 1.29%) was significantly decreased after electrochemical reduction.The ER-GO film exhibited a specific capacitance of 152 F g-1 at the current density of 5 A g-1 and a good rate capability.Furthermore,the ER-GO film showed an excellent cycling ability.The capacitance retention remained 99% after 3000 cycles at the current density of 10 A g-1. | ZHANG Xiong ZHANG DaCheng CHEN Yao SUN XianZhong MA YanWei | 2012 | Chinese Science Bulletin2012，57，23： | 6 |
| 20 | A chemo-mechanical model coupled with thermal effect on the hollow core–shell electrodes in lithium-ion batteries显示文摘Electrode is a key component to remain durability and safety of lithium-ion(Li-ion) batteries. Li-ion insertion/removal and thermal expansion mismatch may induce high stress in electrode during charging and discharging processes. In this paper, we present a continuum model based on COMSOL Multiphysics software, which involves thermal, chemical and mechanical behaviors of electrodes. The results show that,because of diffusion-induced stress and thermal mismatch, the electrode geometry plays an important role in diffusion kinetics of Li-ions. A higher local compressive stress results in a lower Li-ion concentration and thus a lower capacity when a particle is embedded another, which is in agreement with experimental observations. | Bin Hu Zengsheng Ma Weixin Lei Youlan Zou Chunsheng Lu | 2017 | Theoretical & Applied Mechanics Letters2017，7，4： | 6 |
您所在的机构暂未开通此部分的功能，请联系管理员