1篇
您的检索式：作者名="P.C.Tewari"
|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | Studies on induction hardening of powder-metallurgy-processed Fe–Cr/Mo alloys显示文摘Induction hardening of dense Fe–Cr/Mo alloys processed via the powder-metallurgy route was studied. The Fe-3Cr-0.5Mo, Fe-1.5Cr-0.2Mo, and Fe-0.85 Mo pre-alloyed powders were mixed with 0.4wt%, 0.6wt%, and 0.8wt% C and compacted at 500, 600, and 700 MPa, respectively. The compacts were sintered at 1473 K for 1 h and then cooled at 6 K/min. Ferrite with pearlite was mostly observed in the sintered alloys with 0.4wt% C, whereas a carbide network was also present in the alloys with 0.8wt% C. Graphite at prior particle boundaries led to deterioration of the mechanical properties of alloys with 0.8wt% C, whereas no significant induction hardening was achieved in alloys with 0.4wt% C. Among the investigated samples, alloys with 0.6wt% C exhibited the highest strength and ductility and were found to be suitable for induction hardening. The hardening was carried out at a frequency of 2.0 kHz for 2–3 s. A case depth of 2.5 mm was achieved while maintaining the bulk(interior) hardness of approximately HV 230. A martensitic structure was observed on the outer periphery of the samples. The hardness varied from HV 600 to HV 375 from the sample surface to the interior of the case hardened region. The best combination of properties and hardening depth was achieved in case of the Fe-1.5Cr-0.2Mo alloy with 0.6wt% C. | Sandeep Chauhan Vikas Verma Ujjwal Prakash P.C.Tewari Dinesh Khanduja | 2017 | International Journal of Minerals,Metallurgy and Materials2017，24，8： | 0 |
您所在的机构暂未开通此部分的功能，请联系管理员