| 1 | Microstructure refinement,mechanical and biocorrosion properties of Mg–Zn–Ca–Mn alloy improved by a new severe plastic deformation process显示文摘In this study,the microstructural evolution,mechanical properties and biocorrosion performance of a Mg–Zn–Ca–Mn alloy were investigated under different conditions of heat treatment,extrusion,one pass and two passes of half equal channel angular pressing(HECAP)process.The results showed significant grain refinement of the homogenized alloy after two passes of HECAP process from 345μm to 2μm.Field emission scanning electron microscopy(FESEM)revealed the presence of finer Mg_(6)Zn_(3)Ca_(2)phase as well asα-Mn phase after HECAP process.The results also showed that mechanical characteristics such as yield strength,ultimate tensile strength and elongation of the HECAPed samples improved by~208%,~144%and~100%compared to the homogenized one,respectively.Crystallographic texture analysis indicated that most of the grains at the surface were reoriented parallel to the(0001)basal plane after HECAP process.Electrochemical corrosion tests and immersion results indicated that the sample with two passes of HEACP had the highest biocorrosion resistance confirming that the basal planes had the lowest corrosion rate compared to the non-basal ones.The mechanical behavior and bio-corrosion evaluation demonstrated that the HECAPed Mg–Zn–Ca–Mn alloy has great potential for biomedical applications and a mechanism was proposed to explain the interrelations between the thermomechanical processing and bio-corrosion behavior. | M.Kavyani G.R.Ebrahimi H.R.Ezatpour M.Jahazi | 2022 | Journal of Magnesium and Alloys2022，10，6： | 4 |
| 2 | Texture evaluation in warm deformation of an extruded Mg-6Al-3Zn alloy显示文摘To assess the effect of strain and strain rate on texture evolution of an extruded Mg–6Al–3Zn alloy,compression tests were carried out.Samples were prepared in the extrusion direction(ED)and normal direction(ND).The compression tests were performed at 250℃ and with different strain rates of 0.01 sec−1 and 1 sec−1 and different strains.Microstructural observation and texture investigation show that at early stages of deformation,extension twins lead to the development of strong basal texture intensity along rolling direction(RD)in ED samples and contraction twins result in texture evolution along transverse direction(TD)in ND samples.Also,microstructural investigation at high strains reveals that dynamic recrystallization occurs in both samples and consequently the basal texture intensity has been decreased. | M.Kavyani G.R.Ebrahimi M.Sanjari M.Haghshenas | 2016 | Journal of Magnesium and Alloys2016，4，2： | 4 |
您所在的机构暂未开通此部分的功能，请联系管理员