| 1 | The microstructure evolution and tensile properties of medium-Mn steel heat-treated by a two-step annealing process显示文摘The martensitic hot-rolled 0.3 C-6 Mn-1.5 Si(wt%)steel was annealed at 630℃for 24 h to improve its cold rollability,followed by cold rolling and annealing at 670℃for 10 min.The annealing process was designed based on the capacities of industrial batch annealing and continuous annealing lines.A duplex submicron austenite and ferrite microstructure and excellent tensile properties were obtained finally,proved the above process is feasible.'Austenite memory'was found in the hot-rolled and annealed sample which restricted recrystallization of lath martensite,leading to lath-shaped morphology of austenite and ferrite grains.'Austenite memory'disappeared in the cold-rolled and annealed sample due to austenite random nucleation and ferrite recrystallization,resulting in globular microstructure and refinement of both austenite and ferrite grains.The austenite to martensite transformation contributed most of strain hardening during deformation and improved the uniform elongation,but the dislocation strengthening played a decisive role on the yielding behavior.The tensile curves change from continuous to discontinuous yielding as the increase of cold-rolled reduction due to the weakening dislocation strengthening of austenite and ferrite grains related to the morphology change and grain refinement.A method by controlling the cold-rolled reduction is proposed to avoid the Lüders strain. | D.P.Yang P.J.Du D.Wu H.L.Yi | 2021 | Journal of Materials Science & Technology2021，，16： | 7 |
| 2 | Effect of grain size on the intrinsic mechanical stability of austenite in transformation-induced plasticity steels:The competition between martensite transformation and dislocation slip显示文摘The deformation accompanied by austenite to martensite trans-formation was first studied in Fe-Ni alloys,high-Mn steels,and austenitic stainless steels with a full austenite microstructure.The plasticity of these steels can be improved by the trans-formation during deformation and hence they were named as transformation-induced plasticity(TRIP)steels[1].Over the past few decades,a series of TRIP steels with multiphase microstructure for automotive applications were developed.These steels contain-ing a certain amount of austenite were called TRIP-assisted steels,such as low-alloy TRIP steels[2],carbide-free bainitic steels[3],δ-TRIP steels[4],quenching and partitioning steels[5],and medium-Mn steels[6].The mechanical property of TRIP steels is largely determined by the mechanical stability of austenite[7]which de-pends on the chemical composition[8],grain size[9],orientation[10],and morphology[11]of austenite grains,as well as the nature of neighboring phases[12].In most cases of TRIP-assisted steels,larger austenite grains transform to martensite earlier or faster than smaller austenite grains with the increase of macrostrain[13-18],indicating lower mechanical stability.However,larger austen-ite grains usually contain less C and Mn[13,17-19]and suffer more strain than smaller grains during deformation[20],it doesn’t mean that grain refinement increases the mechanical stability of austen-ite. | D.P.Yang T.Wang Z.T.Miao P.J.Du G.D.Wang H.L.Yi | 2023 | Journal of Materials Science & Technology2023，，31： | 0 |
您所在的机构暂未开通此部分的功能，请联系管理员