共被期刊论文引用了7次
您的检索式：您选中1篇文献正在查看引证文献汇总
|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | 铝合金热轧板带成形过程中的应变数值模拟显示文摘采用有限软件Deform-3D对6061铝合金三道次的热轧进行了数值模拟。每道次以有效应变为实验指标,压下率、轧件温度和轧辊温度为实验因素进行正交实验,用云图直观地反映出各个轧制结果的板型质量情况,并通过多组试验对影响板型的参数压下率、轧件温度和轧辊温度进行了分析,来揭示其对6061铝合金板带板型质量的影响规律。 | 邱哲生 鲁俐 贾瑞娇 安迪 陈俊宇 严继康 | 2019 | 有色金属加工2019，48，2： | 2 |
| 2 | Effects of Deformation Modes on Texture Evolution during Hot Working of Al-Zn-Mg-Cu-Zr Alloy显示文摘Deformation modes have strong effects on deformation textures and subsequent annealing textures during hot working of metals. Micro-textures and macro-textures during hot axisymmetric and planar compressive deformation and subsequent annealing processes of Al-Zn-Mg-Cu-Zr alloy were investigated by EBSD and XRD respectively. The EBSD testing indicated that for the axisymmetric compressive deformation, Brass along the α-fiber and Goss present in the sample deformed at 350 ℃, Rotated-Cube was present and Brass transformed to Goss along α-fiber after annealing; Rotated-Cube appeared only in the deformation at 420 ℃, which decreased and Brass appeared after annealing. For the planar compressive deformation, Rotated-Cube and Brass aligned to α and β fibers present in the deformation at 350 ℃, Rotated-Cube texture transformed to Brass along the α-fiber after annealing; Rotated-Cube and Brass were present in the deformation at 420 ℃, and the Rotated-Cube was enhanced and Brass transformed to Goss after annealing. Shearing textures dominated on the surface of the specimen. XRD testing showed that Rotated-Cube and a few Goss dominated in the thickplates formed by upsetting and drawing, which transformed to Cube after annealing; However, Brass and Cube textures present in the thick-plates formed by rolling besides Rotated-Cube and Goss textures, which remained in the plates after annealing. | 赵晓东 LU Ruilong LIN Jinbao 陈慧琴 | 2016 | Journal of Wuhan University of Technology(Materials Science)2016，31，3： | 1 |
| 3 | 大道次压下率对7050合金厚板组织与性能的影响显示文摘研究了7050合金厚板生产中采用大道次压下率轧制工艺对板材组织和性能的影响。结果表明:采用大道次压下量轧制工艺,可使板材心部基体中的不溶第二相粒子得到更充分破碎,纤维组织特征更明显,为后续热处理工艺储备足够能量,为提高材料的力学性能及腐蚀性能奠定了基础。 | 罗杰 张华 陶志民 | 2016 | 铝加工2016，39，1： | 1 |
| 4 | 7B04包铝复合板热变形行为及其对组织演变的影响显示文摘利用热模拟实验研究7B04包铝复合板在变形温度为380~450℃和应变速率为0.1~30 s^(-1)的热压缩性能,结果表明:随着真应变的增加,热加工图失稳区逐渐向高应变速率区域扩展。最适宜的热加工区域为:温度380~410℃,应变速率5~30 s^(-1)。采用EBSD技术对变形后的组织进行表征,结果表明:随着温度的增加和应变速率的降低,再结晶晶粒趋向于晶界平直化及晶界取向差逐渐增加的方向演变。包铝层在变形过程中主要发生连续动态再结晶,而7B04基体中同时存在不连续动态再结晶、连续动态再结晶(含几何动态再结晶)。材料最佳的热变形温度为410℃和应变速率10 s^(-1),此时7B04基体和包铝层的晶粒尺寸均保持在较小的范围内。 | 杨璐 曹敏 曹玲飞 廖斌 王正安 | 2021 | 材料工程2021，49，3： | 1 |
| 5 | 7055(7A55)铝合金研究进展显示文摘7055(7A55)铝合金是在7150合金的基础上,通过提高Zn/Mg比值、进一步降低杂质含量而开发出来的合金化程度更高、强度更高、综合性能较优的变形铝合金。国外自上世纪80年代起步研究,美国1991正式注册,并获得广泛应用。国内研究起步较晚,工业化应用较少,有文献对该合金的综述性报道已超过十年。本文从合金成分设计及优化、均匀化热处理工艺、热加工工艺、固溶热处理工艺、时效工艺、形变热处理工艺等方面介绍了7055(7A55)合金的研究现状及最新进展。 | 牟春 温庆红 林顺岩 冯旺 李霜 | 2021 | 铝加工2021，44，6： | 0 |
您所在的机构暂未开通此部分的功能，请联系管理员