共被期刊论文引用了3次
您的检索式：您选中1篇文献正在查看引证文献汇总
|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | 均压槽与静压气体轴颈轴承承载特性的关系研究显示文摘主要研究通过开设不同结构形式的均压槽来提高静压气体轴颈轴承的承载能力和刚度,利用加权余量法和有限元离散化方法求解雷诺方程进行数值计算和仿真,针对单排孔和双排孔轴颈轴承,分析不同长度的周向均压槽,以及不同数量、不同位置和不同长度的轴向均压槽对轴承承载能力和刚度的影响规律。结果发现:开设周向均压槽和轴向均压槽都可以提高轴承的承载能力,相比开设周向均压槽,开设轴向均压槽对提高轴承的承载能力更为有效,而且只开设一条或两条轴向均压槽就能显著提高轴承的承载能力,通常将轴向均压槽置于气膜间隙较小的位置时能使轴承的承载能力和刚度最大。数值仿真结果通过试验进行验证,研究结果可用以指导高承载和高刚性静压气体轴颈轴承的设计。 | 杜建军 张国庆 刘暾 | 2012 | 机械工程学报2012，48，15： | 15 |
| 2 | Influence Analysis of Machining and Installation Errors on the Radial Stiffness of a Non-Pneumatic Mechanical Elastic Wheel显示文摘Machining and installation errors are unavoidable in mechanical structures. However, the effect of errors on radial stiffness of the mechanical elastic wheel(ME-Wheel) is not considered in previous studies. To this end, the interval mathematical model and interval finite element model of the ME-Wheel were both established and compared with bench test results. The intercomparison of the influence of the machining and installation errors on the ME-Wheel radial stiffness revealed good consistency among the interval mathematical analysis, interval finite element simulation,and bench test results. Within the interval range of the ME-Wheel machining and installation errors, parametric analysis of the combined elastic rings was performed at different initial radial rigidity values. The results showed that the initial radial stiffness of the flexible tire body significantly influenced the ME-Wheel radial stiffness, and the inverse relationship between the hinge unit length or suspension hub and the radial stiffness was nonlinear. The radial stiffness of the ME-Wheel is predicted by using the interval algorithm for the first time, and the regularity of the radial stiffness between the error and the load on the ME-Wheel is studied, which will lay the foundation for the exact study of the ME-Wheel dynamic characteristics in the future. | You-Qun Zhao Zhen Xiao Fen Lin Ming-Min Zhu Yao-Ji Deng | 2018 | Chinese Journal of Mechanical Engineering2018，31，4： | 2 |
| 3 | Static characteristics of new type externally pressurized spherical air bearings显示文摘In order to provide some theoretical guideline for the structure design of the new type externally pressurized spherical air bearings,the static characteristics and the factors affecting the static characteristics of the air bearings were analyzed.A finite volume method was adopted to discretize the three-dimensional steady-state compressible Navier-Stokes equations,and a modified SIMPLE algorithm for compressible fluid was applied to solve the discretized governing equations.The pressure field and velocity field of the air bearings were obtained,and the factors and rules affecting the static characteristics were analyzed.The results show that the pressure of near air intakes can reach above 80% of air supply pressure,and there is a pressure steep fall around the air intakes.When the film thickness is greater than 20 μm,the bearing capacity rapidly decreases as film thickness increases.As the air supply pressure increases from 0.2 to 0.6 MPa,the maximum static stiffness increases by more than three times.The calculation method proposed well fits the general principle,which can be extended to the characteristic analysis of other air bearings. | 王福生 包钢 | 2011 | Journal of Central South University2011，18，4： | 0 |
您所在的机构暂未开通此部分的功能，请联系管理员