共被期刊论文引用了3次
您的检索式：您选中1篇文献正在查看引证文献汇总
|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | 泡沫钛孔隙结构及力学性能显示文摘通过挂浆烧结法制备了两种不同孔隙结构的泡沫钛,利用数码相机和扫描电镜对泡沫钛孔隙结构与形貌观特征进行了观察,通过静态的室温压缩试验,测试了泡沫钛的力学性能与吸能特性。研究发现,应用挂浆烧结法制备的泡沫钛继承了先驱体的结构特征,呈三维立体网状结构,且孔棱是非致密的,存在大量的微孔。泡沫钛是应变速率不敏感的,在应变速率3×10^(-4 )s^(-1)~1×10^(-2 )s^(-1)范围内,其屈服强度为1.00~2.38 MPa,且泡沫钛具有一定的吸能特性,细孔泡沫钛和粗孔泡沫钛的最大吸能量分别为0.78和0.22 MJ/m^3。 | 王耀奇 刘培生 侯红亮 张艳苓 | 2017 | 稀有金属材料与工程2017，46，S1： | 3 |
| 2 | Production and characterization of high porosity porous Fe?Cr?C alloys by the space holder leaching technique显示文摘Spherical carbamide particles were employed to produce porous Fe–Cr–C alloy with high porosity and large aperture via the space-holder leaching technique. A series of porous samples were prepared by regulating the processing parameters, which included the carbamide content and the compaction pressure. The pore characteristics and compression properties of the produced samples were investigated. The samples were characterized by scanning electron microscopy, image analysis, and compression tests. The results showed that the macro-porosity and the mean pore size were in the ranges 40.4%–82.4% and 0.6–1.5 mm, respectively. The compressive strength varied between 25.38 MPa and 127.9 MPa, and was observed to decrease with increasing total porosity. | Da-rong Tian Yu-hua Pang Liang Yu Li Sun | 2016 | International Journal of Minerals,Metallurgy and Materials2016，23，7： | 3 |
| 3 | 生物医学用泡沫Ti-Co合金的制备与表征(英文)显示文摘采用粉末冶金技术添加造孔剂制备生物医学用高孔隙度Ti-Co合金。Ti合金因具有高的熔点和氧亲和力。而难以进行直接加工。添加Co能降低其熔点,因而Ti-Co合金能在更低的温度进行烧结。在人工唾液中考察制备的Ti-Co合金样品的电化学腐蚀行为。研究合金的Co含量、人工唾液的p H值和氟离子浓度升高对样品的电化学腐蚀性能的影响对样品的显微组织和力学性能进行测试。电化学阻抗谱分析结果表明,样品的耐蚀性随氟离子浓度升高和p H值降低而降低。根据Mott-Schottky分析,缺陷密度随氟离子浓度的增加和人工唾液p H值的降低而增加。 | Ilven MUTLU | 2016 | Transactions of Nonferrous Metals Society of China2016，26，1： | 1 |
您所在的机构暂未开通此部分的功能，请联系管理员