|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | 新型聚羧酸水泥助磨剂的合成及应用显示文摘以马来酸酐MA与三乙醇胺TEA反应合成小单体M,后与烯丙基聚乙二醇APEG、MA在水溶液中进行自由基共聚合成新型聚羧酸水泥助磨剂,并对该聚合物进行性能测试。结果表明:n(APEG)∶n(MA)∶n(M)=1∶1∶0.6,引发剂用量为单体总质量的4%,在75℃下反应5 h时,合成的助磨剂效果最佳。将该助磨剂应用于水泥粉磨试验,相比于空白水泥样,45μm筛余量降低19.5%,80μm筛余量降低30.5%,3 d抗压强度提高14.2%,28 d抗压强度提高10.8%,助磨效果良好,且明显优于TEA小分子助磨剂。 | 卫晓慧 王自为 任建国 裴继凯 何强 | 2013 | 混凝土2013，，2： | 11 |
| 2 | 双层多级盘式辊压破碎机的试验研究显示文摘通过介绍双层多级盘式辊压破碎机的结构和工作原理,并应用该破碎机在河北涞源铁矿厂破碎车间进行了连续破碎铁矿石试验研究,通过对试验结果的分析,建立了双层多级盘式辊压破碎机的筛下产品粒度分布模型。粉碎试验结果显示,双层多级盘式辊压破碎机粉碎铁矿石效果理想,可以实现大破碎比,破碎产品粒度小,为选矿粉磨流程中'多碎少磨'的关键技术提供了一种新型设备。 | 祁玉龙 饶绮麟 郎平振 | 2010 | 煤炭学报2010，35，7： | 8 |
| 3 | 我国水泥助磨剂的研究进展与发展趋势显示文摘0引言
在水泥生产过程中,粉磨电耗约占水泥生产总电耗的65%-75%,粉磨成本占生产总成本的35%左右[1]。因此,粉磨对水泥生产企业的效益影响极大。从水泥工业粉磨技术的发展来看,改善粉磨状况,主要采用两种方法:一是对粉磨系统进行改造,二是在粉磨过程中添加水泥助磨剂。在磨机中掺入助磨剂,可以显著改善粉磨进程,提高磨机的台时产量,降低粉磨能耗。 | 张晓平 黄从运 | 2014 | 水泥2014，，9： | 8 |
| 4 | 不同极性官能团助磨剂对水泥粉磨及水化性能影响研究显示文摘本文主要研究了不同官能团助磨剂对纯熟料硅酸盐水泥助磨效果影响的规律。根据化合物碳链长度、官能团数量、官能团位置、多种官能团复合作用等考虑,选取羟基类化合物、甲基类化合物、羧基类化合物、醇胺基类化合物为研究对象,通过内掺法,研究其对水泥粉磨效果的影响,通过外掺法,研究其对水泥性能的影响。试验结果表明,羟基(-OH)可以提高助磨剂吸附能力和水泥颗粒间静电斥力,一定条件下羟基数目越多助磨效果越好,同时也有助于水泥强度发展;甲基(-CH_3)的存在主要起到劈楔作用,对助磨剂的助磨效果有较大提高,但是对水泥的水化有不利影响;羧基(-COOH)可以提高助磨剂吸附能力和水泥颗粒间静电斥力,一定条件下羧基数目越多助磨效果越好,同时也有助于水泥强度发展;醇胺基(-NH-CHOH-)具有提高助磨剂的助磨效果和抗压强度的作用,TIPA、DEIPA和TEA对水泥有较好的助磨作用。 | 伍根伙 张雄 吴永东 | 2016 | 水泥2016，，8： | 7 |
| 5 | New testing methodology for the quantification of rock crushability:Compressive crushing value(CCV)显示文摘Crushing is a size reduction process that plays a key role in both mineral processing and crushing–screening plant design. Investigations on rock crushability have become an important issue in mining operations and the manufacture of industrial crusher equipment. The main objective of this research is to quantify the crushability of hard rocks based on their mineralogical and mechanical properties. For this purpose, the mineralogical, physical, and mechanical properties of various hard rocks were determined. A new compressive crushing value(CCV) testing methodology was proposed. The results obtained from CCV tests were compared with those from mineralogical inspections, rock strength as well as mechanical aggregate tests. Strong correlations were found between CCV and several rock and aggregate properties such as uniaxial compressive strength(UCS), the brittleness index(S_(20)), and aggregate impact value(AIV). Furthermore, the relationship between the mineralogical properties of the rocks and their CCVs were established. It is concluded that the proposed testing methodology is simple and highly repeatable and could be utilized as a pre-design tool in the design stage of the crushing process for rock quarries. | Ekin Koken Ahmet Ozarslan | 2018 | International Journal of Minerals,Metallurgy and Materials2018，25，11： | 1 |
您所在的机构暂未开通此部分的功能，请联系管理员